Cable Cubby 1252 MS

Cable Cubby 1252 MS

1. Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, AV connectivity modules, control modules, and cable retraction modules
   1. Shall support one AC power module plus:
      1. Up to eight AV cables, or
      2. Up to three AV connectivity modules, or
      3. Up to four cable retraction modules, or
      4. Up to one control module and three AV cables or two single-space mini AV connectivity modules
   2. If AC power is not required, shall then support:
      1. Up to sixteen AV cables, or
      2. Up to six AV connectivity modules, or
      3. Up to six cable retraction modules, or
      4. Up to two control modules and six AV cables or four single-space mini AV connectivity modules
   3. Shall include Retractor and connectivity brackets to support cable retraction modules, AV cables, and/or AV connectivity modules with the following capabilities:
      1. AC or AC-plus-USB power module, and cable pass-through or connectivity module, shall be secured within the enclosure, with no fewer than three installer-determined height positions
      2. Module shall be secured within the enclosure, mounting to the left or right of an installed AC or AC-plus-USB power module
      3. AC power modules shall be available for major world markets
         1. AC US power modules shall be UL listed and CE compliant when installed within the enclosure
         2. AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
         3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
         4. An AC US power module that includes an attached conduit with a pigtail of three-wire cable, as required by local electrical power codes and conventions, shall be an available option
      4. AC-plus-USB power modules shall be available for major world markets
         1. AC-plus-USB US series power modules shall be UL listed and CE compliant when installed within the enclosure
         2. AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
         3. AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
         4. An AC-plus-USB US power module that includes an attached conduit with a pigtail of three-wire cable, as required by local electrical power codes and conventions, shall be an available option
         5. AC-plus-USB power modules shall provide one or two USB Type-A or one USB Type-C power outlets
            1. AC-plus-USB US USB Type-A power outlets shall provide 5 volts direct current and up to 4.0 amps, or 20 watts total of shared power by two USB Type-A outlets
            2. AC-plus-USB non-US USB Type-A power outlets shall provide 5 volts direct current and up to3.0 amps, or 15 watts shared total power by the two USB Type-A outlets
            3. AC-plus-USB US USB Type-C power outlets shall provide 5 volts, 9 volts, 12 volts, 15 volts, or 20 volts direct current and up to 3.0 amps, or 45 watts total of shared power, and USB Type-A shall provide 5 volts direct current and up to 2.0 amps or 10 watts, with a total shared power of up to 55 watts
            4. AC-plus-USB non-US USB Type-C power outlet shall provide 5 volts 9 volts, 12 volts, 15 volts, or 20 volts direct current and up to 3.0 amps, or 45 watts, and USB Type-A shall provide 5 volts direct current and up to 2.0 amps or 10 watts, with a total shared combined power of up to 47.5 watts
            5. External, 12 volts direct current, 1.5 amps, or 4.2 watts, 18 watts, or 50 watts power supply shall be included with AC-plus-USB non-US series power outlets
            6. Internal and external power supplies shall both be energy efficient and highly reliable
      5. Internal and external power supplies shall both be designed and manufactured by the same entity providing the enclosure and power module
      6. External power supply shall meet energy efficiency level VI
      7. External power supply shall provide a seven- (7) year warranty on parts and labor
      8. Cable pass-through plate shall be a single unit
         1. Provide flexibility to allow the installation, removal, or replacement of cables
         2. Utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
         3. Include plugs to cap cable pass-through openings that are not utilized
         4. Install from the bottom of the installed enclosure
         5. Assembled plate shall allow servicing from the top of the installed enclosure
      9. AV connectivity frame shall be a single unit
         1. Frame shall be installable to the right or left of an installed AV bracket
         2. Connectivity bracket shall be installable from the bottom of the enclosure
         3. Assembled frame shall allow servicing from the top of the installed enclosure
      10. Optional mounting bracket shall allow mounting of 55 mm x 55 mm connector modules
          1. Bracket shall be installable to the left or right of an installed AV bracket
          2. Bracket shall be installable from the bottom of the installed enclosure
          3. Assembled bracket shall allow servicing from the top of the installed enclosure
   4. Shall include a lid mechanism to accommodate a customer-supplied matching surface material and shall have:
      1. Bezel-less design for flush-mount installation
      2. Black finish
      3. Optional Lid Tray Kit to accommodate a custom veneer, glass, or other material
      4. A full width opening for cable pass-through when closed
      5. An articulating lid such that it fits within the enclosure body when open
      6. A damper that controls the speed of the lid as it moves within the enclosure
   5. Shall mount entirely within an opening sufficient to accommodate the enclosure and shall have/be:
      1. Mounting brackets that enable installation beneath the surface
      2. Height adjustable to allow enclosure to be flush with the surface
      3. Mounting brackets shall be permanently affixed to the enclosure body
      4. Shall be compatible with optional mounting solutions to support additional equipment, including:
         1. Secure mounting of a power supply
         2. Secure mounting and attachment of a device to the enclosure beneath the surface
   6. Shall provide an Internet-accessible application for enclosure configuration and visualization which:
      1. Provides selection of enclosure, AC power modules, AV cables, AV connectivity modules, control modules, and cable retraction modules
      2. Accurately depicts power and connectivity selections
      3. Provides a method of saving a representation of the configured enclosure and corresponding bill of materials
      4. Offers market-specific pricing of the configured enclosure for budgetary purposes
   7. Approved device shall be the Extron Cable Cubby 1252 MS (70-1273-01); no alternates or equals