Accueil - Produits
Enceintes
Enceintes plafond
Enceintes plafond Flat Field Enceintes suspendues Enceintes murales Options de montage d'enceinte Caissons de basses
CS 123T
CS 120P CS 1226T Plus CS 123T CS 26T Plus CS 3T SF 10C SUB SF 26CT SF 26CT LP SF 26X SF 3C LP SF 3CT LP SF 8CT SUB SGK SF26C SGK SF3C

Imprimer

Pro

CS 123T

Système d'enceintes plafond SpeedMount 70/100 volts à large bande

Caractéristiques principales

Enceinte en deux parties brevetée qui a été conçue pour les plafonds suspendus et les installations où le travail est réparti
Le boîtier et le module d'enceinte peuvent être installés séparément par des revendeurs audiovisuels et des électriciens
Permet d'économiser du temps et de l'argent dans les installations où l'enceinte est montée au plafond
Haut-parleur large bande 76 mm (3")
La dispersion conique à 165° offre une large couverture audio et permet de placer les enceintes de manière flexible
Fonctionnement sous 8 Ω directs ou 70/100 V via un sélecteur 6 positions situé derrière la grille
Toutes les caractéristiques

Complete CS 123T SpeedMount Ceiling Speaker System

CS 120P Plenum Rated Enclosure and CS 3T Full-Range Open Back Ceiling Speaker

CS 123T SpeedMount System, shown installed

Previous Next

Galerie d'images

Aperçu interactif

AutoDesk Revit

Vidéos à la une

Outil de sélection d'enceintes

Calculateur pour enceintes plafond

Descriptions pour appel d'offres

Enceintes vendues par paire

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Le système d'enceintes plafond CS 123T SpeedMount^® un système breveté d'enceinte plenum discrète en deux parties. Il permet une dispersion conique du son très étendue de 165° pour plus de flexibilité dans l'espacement des enceintes. Le système est conçu pour des applications de diffusion de messages vocaux pour lesquelles une grande intelligibilité et une couverture maximum sont requises, ainsi que pour les espaces bas de plafond. Le système novateur est constitué du boîtier plenum CS 120P et du module de haut parleur à large bande CS 3T. Le boîtier s'installe rapidement dans les plafonds suspendus de 61 cm x 61 cm (2' x 2') ou 600 mm x 600 mm. Le module d'enceinte dispose d'un haut parleur large bande de 76 mm (3") et peut être utilisé sous 70/100 V ou 8 Ω. Le CS 123T est disponible en tant que système complet, mais il est également possible d'acheter le CS 120P et le CS 3T séparément, pour s'adapter aux installations où le travail est réparti en deux temps.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

CS 123T

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

CS 123T

Provide a two-piece speaker system for suspended ceilings that shall consist of a full-range open back speaker with wide coverage and an internal transformer, as well as a plenum ceiling tile enclosure, and shall accommodate division-of-labor installations.
1. Two-piece speaker system consisting of a full-range open back speaker with an internal transformer for 8 ohm direct and 70/100 volt operation, plus wide 165° conical dispersion, as well as a plenum rated enclosure for suspended ceilings
  1. Driver Requirements
    1. Shall consist of a 3" (7.6 cm) full-range driver
  2. Performance Requirements
    1. Shall provide a frequency range of 118 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a power handling capacity of 16 watts (rms) continuous pink noise per IEC 60268-5 and 32 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 87 dB SPL (1 W, 1 m) measured in half space
    4. Shall provide a nominal impedance of 8 ohms per speaker
    5. Shall provide a nominal conical coverage angle of 165°
  3. Electrical Requirements
    1. Shall support 8 ohm direct or 70/100 volt connection from power amplifiers
    2. Shall provide a 6 position, through-the-grille power tap selector
      1. Shall provide selectable rotary switch taps for 70 volt operation, including 16, 8, 4, 2, and 1 watt, and 8 ohms direct
      2. Shall provide selectable rotary switch taps for 100 volt operation, including 16, 8, 4, and 2 watts, and 8 ohms direct
      3. Shall provide speaker tap selector and selection guide on the front of the speaker
    3. Shall provide an internal overload protection circuit
    4. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
      1. Shall support wiring multiple speakers using parallel or loop-through wiring
      2. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      3. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Speaker Cartridge Enclosure Requirements
    1. Shall have a white, paintable textured finish
    2. Shall provide a thin-edged bezel surrounding the grille
    3. Shall measure 10.3" (26.2 cm) in diameter from bezel edge to edge
    4. Shall measure 3" (7.6 cm) in height from mounting surface to top of withdrawn locking arm posts
    5. Shall weigh 3.4 lbs (1.6 kg) per speaker cartridge
    6. Shall require 9.2" (23.4 cm) diameter opening in mounting surface for speaker cutout
    7. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. Ceiling Tile Enclosure Requirements
    1. Shall consist of a 1' x 2' (20.5 cm x 61 cm) tapered cube designed with aluminized fiberglass, plastic, MDF, and steel materials
    2. Shall provide glass polyfill insulation
    3. Shall measure 23.7" (60.1 cm) in length
    4. Shall measure 11.7" (29.7 cm) in width
    5. Shall measure 4.9" (12.4 cm) in depth
    6. Shall weigh 6.0 lbs (2.72 kg) per ceiling tile enclosure
    7. Shall be compatible with US 2' x 2' suspended ceiling grids and metric 600 mm x 600 mm suspended ceiling grids
  6. Mounting Requirements
    1. Shall provide four, baffle-integrated spring-loaded locking arms
    2. Shall be installed in plenum environments
  7. General Requirements
    1. Shall be sold with a pair of ceiling tile enclosures and a pair of full-range speaker cartridges
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, NFPA 70, and NFPA 90A
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, only when speaker cartridge is used with included plenum ceiling tile enclosure
      3. Shall meet UL 1480 for commercial and professional audio systems
      4. Shall comply with appropriate requirements of RoHS and WEEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron CS 123T, part number 42-242-03; no alternates or equals.

CS 123T

Provide a two-piece speaker system for suspended ceilings that shall consist of a full-range open back speaker with wide coverage and an internal transformer, as well as a plenum ceiling tile enclosure, and shall accommodate division-of-labor installations.
1. Two-piece speaker system consisting of a full-range open back speaker with an internal transformer for 8 ohm direct and 70/100 volt operation, plus wide 165° conical dispersion, as well as a plenum rated enclosure for suspended ceilings
  1. Driver Requirements
    1. Shall consist of a 3" (7.6 cm) full-range driver
  2. Performance Requirements
    1. Shall provide a frequency range of 118 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a power handling capacity of 16 watts (rms) continuous pink noise per IEC 60268-5 and 32 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 87 dB SPL (1 W, 1 m) measured in half space
    4. Shall provide a nominal impedance of 8 ohms per speaker
    5. Shall provide a nominal conical coverage angle of 165°
  3. Electrical Requirements
    1. Shall support 8 ohm direct or 70/100 volt connection from power amplifiers
    2. Shall provide a 6 position, through-the-grille power tap selector
      1. Shall provide selectable rotary switch taps for 70 volt operation, including 16, 8, 4, 2, and 1 watt, and 8 ohms direct
      2. Shall provide selectable rotary switch taps for 100 volt operation, including 16, 8, 4, and 2 watts, and 8 ohms direct
      3. Shall provide speaker tap selector and selection guide on the front of the speaker
    3. Shall provide an internal overload protection circuit
    4. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
      1. Shall support wiring multiple speakers using parallel or loop-through wiring
      2. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      3. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Speaker Cartridge Enclosure Requirements
    1. Shall have a white, paintable textured finish
    2. Shall provide a thin-edged bezel surrounding the grille
    3. Shall measure 10.3" (26.2 cm) in diameter from bezel edge to edge
    4. Shall measure 3" (7.6 cm) in height from mounting surface to top of withdrawn locking arm posts
    5. Shall weigh 3.4 lbs (1.6 kg) per speaker cartridge
    6. Shall require 9.2" (23.4 cm) diameter opening in mounting surface for speaker cutout
    7. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. Ceiling Tile Enclosure Requirements
    1. Shall consist of a 1' x 2' (20.5 cm x 61 cm) tapered cube designed with aluminized fiberglass, plastic, MDF, and steel materials
    2. Shall provide glass polyfill insulation
    3. Shall measure 23.7" (60.1 cm) in length
    4. Shall measure 11.7" (29.7 cm) in width
    5. Shall measure 4.9" (12.4 cm) in depth
    6. Shall weigh 6.0 lbs (2.72 kg) per ceiling tile enclosure
    7. Shall be compatible with US 2' x 2' suspended ceiling grids and metric 600 mm x 600 mm suspended ceiling grids
  6. Mounting Requirements
    1. Shall provide four, baffle-integrated spring-loaded locking arms
    2. Shall be installed in plenum environments
  7. General Requirements
    1. Shall be sold with a pair of ceiling tile enclosures and a pair of full-range speaker cartridges
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, NFPA 70, and NFPA 90A
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, only when speaker cartridge is used with included plenum ceiling tile enclosure
      3. Shall meet UL 1480 for commercial and professional audio systems
      4. Shall comply with appropriate requirements of RoHS and WEEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron CS 123T, part number 42-242-03; no alternates or equals.

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

CS 123T -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.