Accueil - Produits
Amplificateurs de ligne et extendeurs
Extendeurs HDMI
Extendeurs DVI Extendeurs DisplayPort Extendeurs HD‑SDI, 3G‑SDI et 12G‑SDI Extendeurs USB Amplificateurs de ligne et extendeurs VGA et RVB Amplificateur de ligne et extendeur audiovisuels Extendeurs sans fil
DTP2 T 212
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T DSW 4K 333 DTP T DWP 4K 232 D DTP T DWP 4K 332 D DTP T EU 232 DTP T EU 4K 231 DTP T EU 4K 331 DTP T FB 232 DTP T FB 332 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T MK 4K 231 DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 201 D DTP2 T 202 FB DTP2 T 203 DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 T 101 D FOX T USW 103 FOX T USW 203 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 201 FOX3 T 301 FOX3 T 311 FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI Gamme HD Pro Plenum HC 402 HC 403 HC 404 HD 4K 101 Plus HFX 100 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI

Imprimer

Pro

DTP2 T 212

Sélecteur HDMI 4K/60 à deux entrées avec émetteur DTP2 intégré et sortie HDMI

Caractéristiques principales

Transmission de signaux HDMI, de contrôle et audio analogique jusqu'à 100 m (330') sur un câble CATx blindé
Sorties DTP2 et HDMI
Support de résolutions informatiques et vidéo jusqu'au 4K/60 à 4:4:4
Commutation automatique entre les entrées
Embeddage audio stéréo analogique
Prise en charge des caractéristiques de la spécification HDMI 2.0b, notamment des débits de données jusqu'à 18 Gb/s, le HDR, le Deep Color jusqu'à 12 bits, le 3D, et les formats audio HD sans perte
Toutes les caractéristiques

Le câble paires torsadées blindé XTP DTP 24 Extron est fortement recommandé

Galerie d'images

Aperçu interactif

Vidéos à la une

Récompenses

Connected Magazine Most Popular

DTP Selector

Aide pour produits

Descriptions pour appel d'offres

Calculateur de débits de données 8K

Études de cas

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Le DTP2 T 212 Extron est un émetteur à deux entrées qui transmet des signaux HDMI, audio, et de contrôle jusqu'à 100 m (330') à l'aide d'un câble CATx blindé, à un produit équipé DTP^® Extron. Il dispose de deux entrées HDMI, d'une sortie DTP2, et d'une sortie HDMI. Il supporte des résolutions vidéo atteignant le 4K/60 à un échantillonnage 4:4:4 de la chrominance, et est conforme avec l'HDCP 2.3. L'embeddage audio et le contrôle RS‑232 à distance permettent une facilité d'intégration dans des environnements professionnels. Les fonctionnalités qui facilitent le travail des intégrateurs incluent l'EDID Minder^®, la commutation automatique entre les entrées, et l'insertion IR et RS‑232 bidirectionnelle pour le contrôle des appareils audiovisuels à distance. Grâce à la dimension compacte du boîtier, l'appareil peut être facilement placé dans des pupitres, sous des tables, ou dans les emplacements dans lesquels il répond aux besoins d'une application.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

DTP2 T 212

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

DTP2 T 212

Provide an HDMI twisted pair switcher that shall support up to two HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CATx cable
1. Rack-mountable switcher for the extension of HDMI, audio, and control
2. Video input requirements
  1. Shall provide two (2) HDMI inputs for digital video signals
    1. Shall support HDMI 2.0b specifications include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
  2. Shall support digital video resolutions up to 3840x2160/60 @ 4:4:4 chroma sampling
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI input
  2. Shall provide a dedicated analog audio input connection
    1. One (1) 3.5 mm stereo mini jack for audio
4. Video output requirements
  1. Shall provide one (1) HDMI type-A connector for local output
  2. Shall provide one (1) RJ-45 for connection to an Extron DTP®-enabled product
  3. Shall allow HDMI output to be assigned to either HDMI input by SIS™ command
  4. Shall support connection of DVI displays that do not recognize HDMI-specific formats
    1. Automatically enable or disable embedded TMDS audio and InfoFrames
    2. Automatically set the correct color space
  5. Shall be configurable for sending digital video, audio, and bidirectional RS-232 and IR signals to an HDBaseT-enabled display
5. Switching requirements
  1. Shall provide automatic switching between input sources
    1. Automatically switch to the active input
    2. Configurable switching priority when multiple inputs are active
      1. High to low: highest numbered input has priority
      2. Low to high: lowest numbered input has priority
6. Interconnection requirements
  1. Shall support interconnection between transmitter and receiver or DTP®-enabled products
    1. One (1) RJ-45 twisted pair connection
7. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CATx cable
  2. Shall support High Dynamic Range – HDR video
  3. Shall support video, audio, and control over a single shielded CATx cable
  4. Shall actively buffer DDC channels
8. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
  3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
  4. Shall provide real-time verification of HDCP status for each digital video input
    1. Accessible through front panel LEDs
    2. Electronically accessible over RS-232 or USB connection
10. Audio Requirements
  1. Shall provide analog stereo audio embedding
  2. Shall accept additional analog stereo audio signals for simultaneous transmission with HDMI embedded audio
  3. Shall support multiple embedded audio formats
  4. Shall support audio transmission over shielded CATx up to 330 feet (100 meters)
  5. Shall support embedded HD lossless audio formats
11. Communications requirements
  1. Shall support bidirectional RS-232 communication pass-through up to 115200 baud
  2. Shall support bidirectional IR pass-through
  3. Shall support EDID and HDCP transmission
12. Control/Remote – RS-232 and IR Pass-Through over Shielded CATx requirements
  1. Shall provide connection for AV device control
    1. 5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
13. Control/Remote – Switcher Control requirements
  1. Shall provide connections for remote switcher control
    1. 3-pole captive screw: RS-232
    2. Mini USB-B: USB 2.0 on front panel
    3. One (1) 3-pole captive screw: contact closure and tally
    4. One (1) 4-pole captive screw: contact closure and tally
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Product configuration software connected via USB
    3. Serial commands sent over RS-232 and USB connection
    4. Contact closure ports for use as input selection
    5. Tally output that provides +5 VDC to light an LED indicating the currently selected input
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
14. Power requirements
  1. Shall accept remote power from a DTP2-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on rear panel for selection to provide power to a connected DTP2 receiver
15. General requirements
  1. Shall include a USB configuration port on the front panel for data access and firmware updates
  2. Shall provide directly readable real-time verification of signal flow and operation
    1. RJ-45 signal and link LEDs on rear panel
    2. Auto-switching selection status LED on front panel
    3. Signal presence and HDCP status LEDs for active input/s on front panel
    4. Signal presence and HDCP status LEDs for active output/s on front panel
  3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
  4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  5. Shall have a 1-inch (2.5 cm) high, half rack width metal enclosure
  6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
  7. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
  9. Shall be compatible with all Extron DTP-enabled products
16. Approved device shall be the Extron DTP2 T 212(60-1587-52); no alternates or equals

DTP2 T 212

Provide an HDMI twisted pair switcher that shall support up to two HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CATx cable
1. Rack-mountable switcher for the extension of HDMI, audio, and control
2. Video input requirements
  1. Shall provide two (2) HDMI inputs for digital video signals
    1. Shall support HDMI 2.0b specifications include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
  2. Shall support digital video resolutions up to 3840x2160/60 @ 4:4:4 chroma sampling
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI input
  2. Shall provide a dedicated analog audio input connection
    1. One (1) 3.5 mm stereo mini jack for audio
4. Video output requirements
  1. Shall provide one (1) HDMI type-A connector for local output
  2. Shall provide one (1) RJ-45 for connection to an Extron DTP®-enabled product
  3. Shall allow HDMI output to be assigned to either HDMI input by SIS™ command
  4. Shall support connection of DVI displays that do not recognize HDMI-specific formats
    1. Automatically enable or disable embedded TMDS audio and InfoFrames
    2. Automatically set the correct color space
  5. Shall be configurable for sending digital video, audio, and bidirectional RS-232 and IR signals to an HDBaseT-enabled display
5. Switching requirements
  1. Shall provide automatic switching between input sources
    1. Automatically switch to the active input
    2. Configurable switching priority when multiple inputs are active
      1. High to low: highest numbered input has priority
      2. Low to high: lowest numbered input has priority
6. Interconnection requirements
  1. Shall support interconnection between transmitter and receiver or DTP®-enabled products
    1. One (1) RJ-45 twisted pair connection
7. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CATx cable
  2. Shall support High Dynamic Range – HDR video
  3. Shall support video, audio, and control over a single shielded CATx cable
  4. Shall actively buffer DDC channels
8. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
  3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
  4. Shall provide real-time verification of HDCP status for each digital video input
    1. Accessible through front panel LEDs
    2. Electronically accessible over RS-232 or USB connection
10. Audio Requirements
  1. Shall provide analog stereo audio embedding
  2. Shall accept additional analog stereo audio signals for simultaneous transmission with HDMI embedded audio
  3. Shall support multiple embedded audio formats
  4. Shall support audio transmission over shielded CATx up to 330 feet (100 meters)
  5. Shall support embedded HD lossless audio formats
11. Communications requirements
  1. Shall support bidirectional RS-232 communication pass-through up to 115200 baud
  2. Shall support bidirectional IR pass-through
  3. Shall support EDID and HDCP transmission
12. Control/Remote – RS-232 and IR Pass-Through over Shielded CATx requirements
  1. Shall provide connection for AV device control
    1. 5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
13. Control/Remote – Switcher Control requirements
  1. Shall provide connections for remote switcher control
    1. 3-pole captive screw: RS-232
    2. Mini USB-B: USB 2.0 on front panel
    3. One (1) 3-pole captive screw: contact closure and tally
    4. One (1) 4-pole captive screw: contact closure and tally
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Product configuration software connected via USB
    3. Serial commands sent over RS-232 and USB connection
    4. Contact closure ports for use as input selection
    5. Tally output that provides +5 VDC to light an LED indicating the currently selected input
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
14. Power requirements
  1. Shall accept remote power from a DTP2-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on rear panel for selection to provide power to a connected DTP2 receiver
15. General requirements
  1. Shall include a USB configuration port on the front panel for data access and firmware updates
  2. Shall provide directly readable real-time verification of signal flow and operation
    1. RJ-45 signal and link LEDs on rear panel
    2. Auto-switching selection status LED on front panel
    3. Signal presence and HDCP status LEDs for active input/s on front panel
    4. Signal presence and HDCP status LEDs for active output/s on front panel
  3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
  4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  5. Shall have a 1-inch (2.5 cm) high, half rack width metal enclosure
  6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
  7. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
  9. Shall be compatible with all Extron DTP-enabled products
16. Approved device shall be the Extron DTP2 T 212(60-1587-52); no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

DTP2 T 212 -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.