DTP T DSW 4K 333

DTP T DSW 4K 333

1. Provide a switcher that shall support up to three inputs and one output for switching of DisplayPort, HDMI, and VGA sources, with support for long distance signal extension over shielded CATx cable.
   1. Rack-mountable switcher for DisplayPort, HDMI, and VGA sources, and associated digital and analog audio, plus signal extension over shielded CATx cable
      1. Video Input Requirements
         1. Provide video input connections
            1. One DisplayPort
            2. One HDMI
            3. One 15-pin HD for analog video
         2. Shall digitize video input signals up to 1920x1200 prior to transmission to the digital video output
         3. Supported HDMI specifications include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
         4. Shall support DisplayPort SST - Single Stream Transport data rates up to 10.8 Gbps
         5. Support digital video resolutions up to 4K, including 1080p/60 Deep Color
      2. Video Output Requirements
         1. Provide video output connections
            1. One RJ-45 for connection an Extron DTP®-enabled product
         2. Support connection of DVI displays that do not recognize HDMI-specific formats
            1. Automatically enable or disable embedded TMDS audio and InfoFrames
            2. Automatically set the correct color space
         3. Provide signal transmission distance capability of 330 feet (100 m) for supported resolutions, including 4K, UHD, 2560x1600, and 1080p @ 60 Hz using a shielded CATx cable
         4. Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display
      3. Switching Requirements
         1. Provide automatic switching between input sources
            1. Automatically switch to the active input
            2. Provide a configurable switching priority when multiple inputs are active
               1. High to low: highest numbered input has priority
               2. Low to high: lowest numbered input has priority
         2. Provide the capability to set the analog audio input to follow the input switch
      4. EDID Requirements
         1. Provide automatic EDID management between connected devices
            1. Provide a set of pre-stored EDID files
            2. Support capture of EDID from any connected display
            3. Support user uploading of custom-generated EDID files
            4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
      5. HDCP Requirements
         1. The unit shall be HDCP compliant
         2. Shall provide the option to disable HDCP processing at the DisplayPort or HDMI input connection when passing unencrypted content
         3. Provide real-time verification of HDCP status for each digital video input
            1. Accessible through front panel LEDs
            2. Electronically accessible over RS-232 or USB connection
      6. Audio Requirements
         1. Provide audio input connections
            1. One DisplayPort, embedded
            2. One HDMI, embedded
            3. One 3.5 mm stereo mini jack, unbalanced analog stereo
         2. Provide audio output connection
            1. One RJ-45, DTP HDMI embedded and analog audio
         3. Provide the capability to assign the analog audio input to any video input
         4. Provide the capability to set the analog audio input to follow the input switch
         5. Support embedding analog stereo audio signals onto the digital video output signal and transport over DTP
         6. Support multiple embedded audio formats
         7. Support audio transmission over shielded CATx up to 330 feet (100 meters)
            1. Shall digitize analog stereo audio input for transmission over shielded CATx
      7. Control/Remote – RS-232 and IR Pass-Through over Shielded CATx Requirements
         1. Provide connection for AV device control
            1. 5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
      8. Control/Remote – Switcher Control Requirements
         1. Provide connections for remote switcher control
            1. 3-pole captive screw: RS-232
            2. Mini USB-B: USB 2.0
            3. 4-pole captive screw: contact closure
            4. 4-pole captive screw: tally
         2. Provide alternatives for configuration and operation
            1. Front panel controls
            2. Product configuration software connected via USB
            3. Serial commands sent over RS-232 or USB connection
         3. Tally output shall provide +5 VDC to light an LED indicating the currently selected input
         4. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
      9. General Requirements
         1. Provide real-time verification of signal flow and operation
            1. Directly readable on RJ-45 signal and link LEDs
         2. Shall be compatible with all Extron DTP-enabled products
         3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
         4. Provide power to a connected DTP receiver
         5. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
         6. Enclosure shall be rack-mountable, half rack width, and 1" (2.5 cm) in height
         7. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
         8. Shall meet regulatory compliances
            1. CE, c-UL, UL
            2. CE, C-tick, FCC Class A, ICES, VCCI
         9. Shall provide at least 3 years parts and labor warranty
   2. Approved device shall be the Extron DTP T DSW 4K 333 (part number 60-1487-52); no alternates or equals