EBP 108 RAAP

EBP 108 RAAP

1. Provide an eBUS enabled, rack mountable button panel for the purpose of remotely controlling, monitoring and troubleshooting connected AV equipment and AV systems when paired with an Extron IPCP Pro series control processor.
   1. Fully-customizable eBUS enabled button panel interface.
      1. Device shall have a total of eight dual color LED backlit buttons, six dedicated for input selection and the remaining two dedicated for power.
         1. Buttons shall illuminate white or red, depending on function, for ease of use in low-light environments.
         2. Buttons shall feature two levels of illumination, dim and bright
         3. Buttons shall feature removable button caps allowing them to be custom labeled for easy identification.
      2. Device shall provide a rotary encoder knob located adjacent to the input buttons that can be configured or programmed to control the audio level of an AV system.
      3. Device shall feature eight white LEDs arranged vertically located adjacent to the rotary encoder. When configured or programmed, these LEDs shall provide visual feedback to reflect the relative audio level of the AV system.
      4. Provide four eBUS ports on 4-pole captive screw connectors located on the back of the button panel that allows communication to the control processor and for control system expansion.
      5. Device shall feature a six-pole dip switch for assigning a unique Bus ID to the button panel.
      6. Device shall include a reset button that allows for the reset back to original factory settings.
      7. Provide three eBUS status LEDs located on the back of the panel that will be used as a visual indication of connection, communication, and ID status.
      8. Device shall be Section 508 compliant and shall meet or exceed U.S. accessibility standards for Electronic Information Technology.
      9. Device may be wired using the following topologies: Daisy Chain, Star and Hybrid.
         1. The cable length of a topology may not exceed a sum total 1,000 feet.
      10. eBUS supports a maximum of eight devices when using Global Configurator Plus or Professional
      11. eBUS supports the following cabling types:
          1. Extron STP20-2 Cable
          2. CAT5e or CAT 6 cable, the cable must be 23 AWG solid copper wire.
      12. eBUS supports power and communication over a single cable.
      13. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
      14. Device shall be controllable using Extron Control for Web, Android and iOS as a secondary point of control.
      15. Device shall support the following Extron AAP AV connectivity plates:
          1. Up to four single space Extron AAP plates, or
          2. Up to two double space Extron AAP plates, or
          3. Up to one double and two single Extron AAP plates
      16. Device shall be black in color.
   2. Mounting requirements
      1. Device shall be rack-mountable, full rack width, and 1RU in height
   3. Software requirements
      1. The interface may be configured or programmed using Extron’s Global Configurator Plus or Professional or Global Scripter respectively.
   4. Shall meet regulatory compliances
      1. CE
      2. c-UL
      3. UL
      4. C-Tick
      5. FCC Class A
      6. ICES
      7. VCCI class A
   5. Product Warranty
      1. Shall provide at least 3 years parts and labor
   6. Approved device shall be the Extron EBP 108 RAAP part number 60-1710-02; no alternates or equals