Accueil - Produits
HDMI
Extendeurs HDMI
Distributeurs amplificateurs HDMI Sélecteurs HDMI Grilles de commutation HDMI Scalers et processeurs de signaux HDMI Modules de connectivité audiovisuelle HDMI Câbles et adaptateurs HDMI Gestion EDID
eLink 100
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T EU 232 DTP T EU 4K 231 DTP T EU 4K 331 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T MK 4K 231 DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 202 FB DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 R 201 DTP3 R 301 DTP3 R 331 DTP3 T 101 D DTP3 T 202 DTP3 T 202 EU/MK DTP3 T 203 DTP3 T 212 D DTP3 T 301 DTP3 T 322 D DTP3 T 331 eLink 100 FOX II T HD 4K FOX T USW 203 FOX3 R 111 FOX3 R 311 FOX3 SR 201 FOX3 SR 201 PC FOX3 SR 301 FOX3 SR 301 PC FOX3 SR 311 FOX3 SR 311 PC FOX3 T 111 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI Gamme HD Pro Plenum HC 402 HC 404 HD 4K 101 Plus PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD

Twitter Copier le lien

Imprimer

Pro

eLink 100

Extendeur sans fil professionnel pour HDMI

Caractéristiques principales

Transmission sans fil fiable et professionnelle des signaux vidéo et audio multi-canaux HDMI jusqu'à 30 mètres (100 pieds)
Capacité de transmission à travers plusieurs murs et plusieurs meubles
Accepte les signaux vidéo-informatiques jusqu'à 1920x1080, dont HDTV 1080p/60
Conforme à la norme HDCP
Transmission à très faible latence des signaux vidéo et audio
La technologie professionnelle permet la transmission simultanée depuis un émetteur vers quatre récepteurs
Toutes les caractéristiques

Previous Next

Galerie d'images

Aperçu interactif

Vidéos à la une

Descriptions pour appel d'offres

Études de cas

L'eLink 100 est certifié pour une utilisation dans certains pays. Veuillez consulter les Caractéristiques techniques du produit pour obtenir une liste complète de ces pays.

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

L'eLink 100 Extron est un ensemble émetteur/récepteur sans fil professionnel pour la transmission de la vidéo HDMI et de l'audio multi-canaux jusqu'à 30 mètres (100 pieds). Cet extendeur conforme à la norme HDCP dispose d'une technologie de communication sans fil résistante pour assurer une grande fiabilité et une performance en temps réel avec une qualité d'image exceptionnelle pour des résolutions allant jusqu'à 1920x1080, dont HDTV 1080p/60. Il inclut des fonctionnalités conçues spécifiquement pour les systèmes audiovisuels professionnels telle que le cryptage AES‑128 pour assurer une connexion sécurisée et l'utilisation d'un spectre 5 GHz pour une transmission à travers plusieurs murs. La technologie eLink™ Extron assure une utilisation fonctionnelle de quatre ensembles d'extendeurs eLink maximum, y compris en présence d'autres systèmes sans fil dans la même structure. En plus des designs points à points, un émetteur peut accepter quatre récepteurs pour créer un système de distribution sans fil.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

eLink 100

TLP Pro 525M

eLink 100

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

eLink 100 T US

Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless transmitter for video and embedded audio
2. Video input requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio input requirements
  1. Shall support embedded audio on HDMI input connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI input connector
5. Control output requirements
  1. Shall provide one 3.5 mm jack for IR emitter connection
  2. Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide connection for 5 VDC power on one barrel connector
  2. Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
  3. Shall provide a recessed button located on the top panel to register a transmitter to a receiver
  4. Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
  5. Shall have a compact enclosure
  6. Shall be wall mountable with included mounting kit
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the eLink 100 R US wireless receiver
11. Approved device shall be the Extron eLink 100 T US (60-1490-02); no alternates or equals

eLink 100 T US

Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless transmitter for video and embedded audio
2. Video input requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio input requirements
  1. Shall support embedded audio on HDMI input connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI input connector
5. Control output requirements
  1. Shall provide one 3.5 mm jack for IR emitter connection
  2. Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide connection for 5 VDC power on one barrel connector
  2. Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
  3. Shall provide a recessed button located on the top panel to register a transmitter to a receiver
  4. Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
  5. Shall have a compact enclosure
  6. Shall be wall mountable with included mounting kit
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the eLink 100 R US wireless receiver
11. Approved device shall be the Extron eLink 100 T US (60-1490-02); no alternates or equals

eLink 100 R US

Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless receiver for video, and embedded audio
2. Video output requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio output requirements
  1. Shall support embedded audio on HDMI output connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI output connector
5. Control input requirements
  1. Shall provide one IR detector input
  2. Shall support IR remote control for configuration and setup
  3. Shall provide on-screen display – OSD menus for setup and configuration
  4. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide a button located on the top panel to power up and power down the unit
  2. Shall provide connection for 5 VDC power on one USB mini plug connector
  3. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators for link status, video signal presence, and power
  3. Shall provide a button located on the top panel to register a transmitter to a receiver
  4. Shall have a compact enclosure
  5. Shall be wall mountable with included mounting kit
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the eLink 100 T US wireless transmitter
11. Approved device shall be the Extron eLink 100 R US (60-1490-03); no alternates or equals

eLink 100 R US

Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless receiver for video, and embedded audio
2. Video output requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio output requirements
  1. Shall support embedded audio on HDMI output connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI output connector
5. Control input requirements
  1. Shall provide one IR detector input
  2. Shall support IR remote control for configuration and setup
  3. Shall provide on-screen display – OSD menus for setup and configuration
  4. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide a button located on the top panel to power up and power down the unit
  2. Shall provide connection for 5 VDC power on one USB mini plug connector
  3. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators for link status, video signal presence, and power
  3. Shall provide a button located on the top panel to register a transmitter to a receiver
  4. Shall have a compact enclosure
  5. Shall be wall mountable with included mounting kit
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the eLink 100 T US wireless transmitter
11. Approved device shall be the Extron eLink 100 R US (60-1490-03); no alternates or equals

eLink 100 T EU

Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless transmitter for video and embedded audio
2. Video input requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio input requirements
  1. Shall support embedded audio on HDMI input connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI input connector
5. Control output requirements
  1. Shall provide one 3.5 mm jack for IR emitter connection
  2. Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide connection for 5 VDC power on one barrel connector
  2. Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
  3. Shall provide a recessed button located on the top panel to register a transmitter to a receiver
  4. Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
  5. Shall have a compact enclosure
  6. Shall be wall mountable with included mounting kit
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the eLink 100 R EU wireless receiver
11. Approved device shall be the Extron eLink 100 T EU (60-1490-12); no alternates or equals

eLink 100 T EU

Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless transmitter for video and embedded audio
2. Video input requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio input requirements
  1. Shall support embedded audio on HDMI input connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI input connector
5. Control output requirements
  1. Shall provide one 3.5 mm jack for IR emitter connection
  2. Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide connection for 5 VDC power on one barrel connector
  2. Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
  3. Shall provide a recessed button located on the top panel to register a transmitter to a receiver
  4. Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
  5. Shall have a compact enclosure
  6. Shall be wall mountable with included mounting kit
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the eLink 100 R EU wireless receiver
11. Approved device shall be the Extron eLink 100 T EU (60-1490-12); no alternates or equals

eLink 100 R EU

Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless receiver for video and embedded audio
2. Video output requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio output requirements
  1. Shall support embedded audio on HDMI output connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI output connector
5. Control input requirements
  1. Shall provide one IR detector input
  2. Shall support IR remote control for configuration and setup
  3. Shall provide on-screen display – OSD menus for setup and configuration
  4. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide a button located on the top panel to power up and power down the unit
  2. Shall provide connection for 5 VDC power on one USB mini plug connector
  3. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators for link status, video signal presence, and power
  3. Shall provide a button located on the top panel to register a transmitter to a receiver
  4. Shall have a compact enclosure
  5. Shall be wall mountable with included mounting kit
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the eLink 100 T EU wireless transmitter
11. Approved device shall be the Extron eLink 100 R EU (60-1490-13); no alternates or equals

eLink 100 R EU

Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless receiver for video and embedded audio
2. Video output requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio output requirements
  1. Shall support embedded audio on HDMI output connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI output connector
5. Control input requirements
  1. Shall provide one IR detector input
  2. Shall support IR remote control for configuration and setup
  3. Shall provide on-screen display – OSD menus for setup and configuration
  4. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide a button located on the top panel to power up and power down the unit
  2. Shall provide connection for 5 VDC power on one USB mini plug connector
  3. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators for link status, video signal presence, and power
  3. Shall provide a button located on the top panel to register a transmitter to a receiver
  4. Shall have a compact enclosure
  5. Shall be wall mountable with included mounting kit
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the eLink 100 T EU wireless transmitter
11. Approved device shall be the Extron eLink 100 R EU (60-1490-13); no alternates or equals

eLink 100 T AUS

Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless transmitter for video and embedded audio
2. Video input requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio input requirements
  1. Shall support embedded audio on HDMI input connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI input connector
5. Control output requirements
  1. Shall provide one 3.5 mm jack for IR emitter connection
  2. Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide connection for 5 VDC power on one barrel connector
  2. Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
  3. Shall provide a recessed button located on the top panel to register a transmitter to a receiver
  4. Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
  5. Shall have a compact enclosure
  6. Shall be wall mountable with included mounting kit
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the eLink 100 R AUS wireless receiver
11. Approved device shall be the Extron eLink 100 T AUS (60-1490-22); no alternates or equals

eLink 100 T AUS

Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless transmitter for video and embedded audio
2. Video input requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio input requirements
  1. Shall support embedded audio on HDMI input connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI input connector
5. Control output requirements
  1. Shall provide one 3.5 mm jack for IR emitter connection
  2. Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide connection for 5 VDC power on one barrel connector
  2. Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
  3. Shall provide a recessed button located on the top panel to register a transmitter to a receiver
  4. Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
  5. Shall have a compact enclosure
  6. Shall be wall mountable with included mounting kit
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the eLink 100 R AUS wireless receiver
11. Approved device shall be the Extron eLink 100 T AUS (60-1490-22); no alternates or equals

eLink 100 R AUS

Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless receiver for video and embedded audio
2. Video output requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio output requirements
  1. Shall support embedded audio on HDMI output connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI output connector
5. Control input requirements
  1. Shall provide one IR detector input
  2. Shall support IR remote control for configuration and setup
  3. Shall provide on-screen display – OSD menus for setup and configuration
  4. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide a button located on the top panel to power up and power down the unit
  2. Shall provide connection for 5 VDC power on one USB mini plug connector
  3. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators for link status, video signal presence, and power
  3. Shall provide a button located on the top panel to register a transmitter to a receiver
  4. Shall have a compact enclosure
  5. Shall be wall mountable with included mounting kit
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the eLink 100 T AUS wireless transmitter
11. Approved device shall be the Extron eLink 100 R AUS (60-1490-23); no alternates or equals

eLink 100 R AUS

Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
1. Long distance wireless receiver for video and embedded audio
2. Video output requirements
  1. Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
  2. Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
  3. Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
3. Audio output requirements
  1. Shall support embedded audio on HDMI output connector
  2. Shall support PCM, DTS, and Dolby 5.1 audio formats
4. Communication requirements
  1. Shall support EDID and HDCP pass-through on HDMI output connector
5. Control input requirements
  1. Shall provide one IR detector input
  2. Shall support IR remote control for configuration and setup
  3. Shall provide on-screen display – OSD menus for setup and configuration
  4. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
6. Interconnection requirements
  1. Shall provide wireless omnidirectional interconnection between transmitter and receiver
  2. Shall provide internal antennas for wireless transmission
7. Transmission requirements
  1. Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
  2. Shall support extension of video with embedded audio wirelessly
  3. Shall support less than one millisecond of latency for video and audio signals
  4. Shall operate in the 5 GHz spectrum
  5. Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
    1. Shall actively monitor RF spectrum for interference from other wireless devices
    2. Shall automatically select an appropriate transmission channel to prevent interference from other devices
  6. Shall support multi-input and multi-output – MIMO wireless technology
  7. Shall support Advanced Encryption Standard – AES 128 for secure data transmission
  8. Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
8. HDCP requirements
  1. Shall be HDCP compliant
9. Power requirements
  1. Shall provide a button located on the top panel to power up and power down the unit
  2. Shall provide connection for 5 VDC power on one USB mini plug connector
  3. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
10. General requirements
  1. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  2. Shall provide visual signal on LED indicators for link status, video signal presence, and power
  3. Shall provide a button located on the top panel to register a transmitter to a receiver
  4. Shall have a compact enclosure
  5. Shall be wall mountable with included mounting kit
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the eLink 100 T AUS wireless transmitter
11. Approved device shall be the Extron eLink 100 R AUS (60-1490-23); no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

eLink 100 -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Partager cet élément par e-mail

eLink 100

Extendeur sans fil professionnel pour HDMI

Envoyé à: *

Veuillez entrer une adresse électronique valide.

Message:

( caractère(s) restant(s))

Envoyez-moi une copie

Merci. Votre e-mail a été envoyé.

Une erreur est survenue lors de l'envoi de votre e-mail. Veuillez réessayer ultérieurement.