ASA 101 RETIRÉ

Passive ASA - Audio Summing Adapter with RCA Inputs and Balanced/Unbalanced Output
Caractéristiques principales
  • Converts unbalanced stereo audio to balanced or unbalanced mono audio
  • Resistor network provides passive audio summing
  • Internal transformer isolates signal from load and provides balanced output
  • Compact design for easy installation into small spaces or behind equipment in a rack
The Extron ASA 101
Modèle Description de la version Référence
 ASA 101 RCA Input; Transformer Balanced 60-551-01 RETIRÉ

Ce produit a été retiré de la vente.
Remplacement suggéré
ASA 141

Caractéristiques

  • Converts unbalanced stereo audio to balanced or unbalanced mono audio
  • Input: Male RCA connectors on 6 inch leads
  • Output: Captive screw terminal
  • Resistor network provides passive audio summing
  • Internal transformer isolates signal from load and provides balanced output
  • Compact design for easy installation into small spaces or behind equipment in a rack
  • 2 foot (60 cm) length
PRODUITS SIMILAIRES
  ASA 111 Adaptateur sommateur audio passif avec entrée stéréo mini‑fiche et sortie asymétrique
  ASA 121 Adaptateur sommateur audio passif avec entrées RCA et sortie asymétrique
  ASA 131 Adaptateur sommateur audio passif avec entrée sur bornier et sortie symétrique
  ASA 141 Adaptateur sommateur audio passif avec entrées RCA et sortie symétrique/asymétrique
  Borniers à vis Borniers à vis de rechange pour produits Extron
  Câble STP20 Câble audio/contrôle série
  Câble STP20-2 Câble audio/contrôle série
  Câble STP22 Câble audio/contrôle série
  Câble STP22-2 Câble audio/contrôle série
  Câbles RCA audio Câbles audio stéréo RCA mâle/mâle
  CSM 6 Adaptateur vis captive/mini jack stéréo 3,5 mm femelle
  CSR 6 Adaptateur audio connecteur à vis captive/RCA femelle
  Mini câbles audio Câbles audio stéréo mâle/mâle 3,5 mm
  Mini stéréo HQ 3,5 mm Connecteur audio stéréo mâle 3,5 mm
  MSR 6 Adaptateur audio stéréo mâle 3,5 mm vers audio stéréo femelle RCA
  PCC-1 18/20 Câble d'enceinte PendantConnect pré-coupé pour SF 3PT
  PCC-1 18/500 Bobine de câble d'enceinte PendantConnect pour SF 3PT
  PCC-2 18/30 Câble d'enceinte PendantConnect pré-raccordé pour SF 26PT et SF 28PT
  PCC-2 18/500 Câble d'enceinte PendantConnect pour SF 26PT et SF 28PT
  SPK 14 Câble pour enceinte 14 AWG
  SPK 16 Câble pour enceinte 16 AWG
  SPK 18 Câble pour enceinte 18 AWG
  TRSM-RCAM 6 Adaptateur audio stéréo mâle 3,5 mm/2 audio stéréo mâle RCA

Caractéristiques techniques

ASA 101
Audio
   NOTE  All audio specifications were tested with a stereo audio source, 50 ohm output impedance, and a sink with a 10k ohm load. Both left and right input channels were connected to the source at all times, even in tests where a signal was present at one input only.
  Gain  Generally unity gain with unbalanced output, +6 dB gain with balanced output. See the table below. Entries with an asterisk (*) indicate the input was set to no signal, but was still connected to the audio source.

  Frequency response  280 Hz to 20 kHz, ±0.5 dB, full frequency range THD+N <1%, with -10 dBV input
  THD + Noise  0.1% @ 1 kHz, <1% @ 280 Hz to 20 kHz
  S/N  130 dB at maximum output
  Stereo channel separation  >80 dB @ 1 kHz, >60 dB @ 20 kHz
Audio input
  Number/signal type  1 stereo, unbalanced
  Connectors  1 pair of male RCA (tip-ring)
  Impedance  300 ohms (with both input connectors connected to a stereo source)
  Nominal level  -10 dBV (316 mV)
  Maximum level  +7 dBV (2.2 V) @ 1 kHz, (unbalanced) at <1% THD+N
   NOTE  0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
  Number/signal type  1 mono, balanced/unbalanced
  Connectors  (1) 3.5 mm direct insertion captive screw connector, 3 pole
  Impedance  80 ohms
  Nominal level  -10 dBV (316 mV)
  Maximum level  +7 dBV (2.2 V) @ 1 kHz, (unbalanced) at <1% THD+N
General
  Power  Not powered
  Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
  Rack mount  Can be attached to any flat surface with supplied Velcro®
  Enclosure type  Molded plastic
  Enclosure dimensions  0.7" H x 1.0" W x 1.5" D
1.8 cm H x 2.5 cm W x 3.8 cm D
(Depth excludes the 24 inch long pigtail.)
  Product weight  0.2 lbs (0.1 kg)
  Shipping weight  1 lb (1 kg)
  Vibration  ISTA 1A in carton (International Safe Transit Association)
  Listings  UL, CUL
  Compliances  CE, FCC Class A, VCCI, AS/NZS, ICES
  MTBF  30,000 hours
  Warranty  3 years parts and labor
   NOTE  All nominal levels are at ±10%.
   NOTE  Specifications are subject to change without notice.
(7.52-031506-D2)

Schéma

ASA 101 System Diagram

Schéma des panneaux

ASA 101 Panel Drawing