| CrossPoint 450 Plus Series |
|
| Video |
|---|
| Routing | |
| 84 Series | 8 x 4 matrix |
| 88 Series | 8 x 8 matrix |
| 816 Series | 8 x 16 matrix |
| 124 Series | 12 x 4 matrix |
| 128 Series | 12 x 8 matrix |
| 1212 Series | 12 x 12 matrix |
| 168 Series | 16 x 8 matrix |
| 1616 Series | 16 x 16 matrix |
| 2412 Series | 24 x 12 matrix |
| 2424 Series | 24 x 24 matrix |
| 3216 Series | 32 x 16 matrix |
| 3232 Series | 32 x 32 matrix |
| Gain | Unity |
| Bandwidth | 450 MHz (-3 dB), fully loaded |
| 0 - 10 MHz | No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz | No more than +0.8 dB to -0.8 dB |
| Crosstalk | -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz |
| Switching speed | 200 ns (max.) |
|
| Video input |
|---|
| Number/signal type | 8, 12, 16, 24, or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors | |
| 84/88/816 Series | 8 x 5 BNC female |
| 124/128/1212 Series | 12 x 5 BNC female |
| 168/1616 Series | 16 x 5 BNC female |
| 2412/2424 Series | 24 x 5 BNC female |
| 3216/3232 Series | 32 x 5 BNC female |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 1.5 V |
|
| Video output |
|---|
| Number/signal type | 4, 8, 12, 16, 24, or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors | |
| 84/124 Series | 4 x 5 BNC female |
| 88/128/168 Series | 8 x 5 BNC female |
| 1212/2412 Series | 12 x 5 BNC female |
| 816/1616/3216 Series | 16 x 5 BNC female |
| 2424 Series | 24 x 5 BNC female |
| 3232 Series | 32 x 5 BNC female |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0 V to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
| Switching type | Triple-Action™ |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level | AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
| Input impedance | Inputs 1 to 4: 75 or 510 ohms, switchable
Inputs 5 to 8, 12, or 16: 510 ohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.0 Vp-p |
| Max. propagation delay | <120 ns |
| Max. rise/fall time | 4 ns |
| Polarity | Positive or negative (follows input) |
|
| Audio — audio models only |
|---|
| Routing | |
| 84 Series | 8 x 4 stereo matrix |
| 88 Series | 8 x 8 stereo matrix |
| 816 Series | 8 x 16 stereo matrix |
| 124 Series | 12 x 4 stereo matrix |
| 128 Series | 12 x 8 stereo matrix |
| 1212 Series | 12 x 12 stereo matrix |
| 168 Series | 16 x 8 stereo matrix |
| 1616 Series | 16 x 16 stereo matrix |
| 2412 Series | 24 x 12 stereo matrix |
| 2424 Series | 24 x 24 stereo matrix |
| 3216 Series | 32 x 16 stereo matrix |
| 3232 Series | 32 x 32 stereo matrix |
| Gain | Unbalanced output: -6 dB; balanced output 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 dB, balanced, at maximum output (21 dBu), unweighted |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >80 dB @ 1 kHz |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
|
| Audio input — audio models only |
|---|
| Number/signal type | 8, 12, 16, 24, or 32 stereo, balanced/unbalanced |
| Connectors | (8, 12, 16, 24, or 32) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >10k ohm, balanced/unbalanced, DC coupled |
| Nominal level | 0 dBu (775 mV) |
| Maximum level | +19.5 dBu, (balanced or unbalanced) at 0.01% THD+N |
| Input gain adjustment | -18 dB to +24 dB (default = 0 dB), adjustable per input by RS-232/422, Ethernet, or front panel |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — audio models only |
|---|
| Number/signal type | 4, 8, 12, 16, 24, or 32 stereo, balanced/unbalanced |
| Connectors | (4, 8, 12, 16, 24, or 32) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 1.0% THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1.0% THD+N |
| Output volume range | 0 to 64 (-75.8 dB to 0 dB) in 1 dB increments from steps 1 to 64, 12 dB increment from step 0 to 1; default = 64 = 0 dB |
|
| Control/remote — switcher |
|---|
| Serial host control port | |
| 2412, 2424, 3216, 3232 Series |
| | 1 RS-232 or RS-422, rear panel 9-pin female D connector |
| All other models | 1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector
1 bidirectional RS-232, front panel 2.5 mm mini stereo jack |
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| RS-232 | 9-pin female D connector: 2 = TX, 3 = RX, 5 = GND
Mini stereo jack: tip = TX, ring = RX, sleeve = GND |
| RS-422 | |
| 88, 816, 1212, 168, 1616 Series |
| | 9-pin female D connector: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+ |
| All other models | 9-pin female D connector: 1 = TX+, 2 = TX-, 3 = Rx+, 4 = RX-, 5 = GND |
| Ethernet control port | 1 RJ-45 female connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer, Telnet |
|
| General |
|---|
| Power | |
| 24- and 32-input models | 2 power supplies (1 primary, 1 redundant), 100 VAC to 240 VAC, 50/60 Hz, internal
2412/2424 Series: 150 watts
3216/3232 Series: 180 watts |
| Power | |
| All other models | 100 VAC to 240 VAC, 50/60 Hz, internal
84/88/124/128 Series: 30 watts
816/1212/168/1616 Series: 36 watts |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | |
| 84-1616 Series | Convection, no vents |
| 2412-3232 Series | Fan, right to left (as viewed from the front) |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.) |
| 84/88/124/128 Series | 5.25" H x 17.0" W x 9.4" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 23.9 cm D) |
| 816/1212/168/1616 Series | 10.5" H x 17.0" W x 9.7" D (6U high, full rack wide)
(26.7 cm H x 43.2 cm W x 24.6 cm D) |
| 2412/3216 Series | 14.0" H x 17.0" W x 12.0" D (8U high, full rack wide)
(35.5 cm H x 43.2 cm W x 30.5 cm D) |
| 2424/3232 Series | 17.5" H x 17.0" W x 12.0" D (10U high, full rack wide)
(44.5 cm H x 43.2 cm W x 30.5 cm D) |
| Product weight | |
| 84/88/124/128 Series | 14.4 lbs (6.5 kg) |
| 816/1212/168/1616 Series | 19.4 lbs (8.8 kg) |
| 2412/3216 Series | 39.0 lbs (17.7 kg) |
| 2424/3232 Series | 42.0 lbs (19.1 kg) |
| Shipping weight | |
| 84/88/124/128 Series | 21 lbs (10 kg) |
| 816/1212/168/1616 Series | 26 lbs (12 kg) |
| 2412/3216 Series | 56 lbs (26 kg) |
| 2424/3232 Series | 60 lbs (28 kg) |
| DIM weight, international | |
| 84/88/124/128 Series | 25 lbs (12 kg) |
| 816/1212/168/1616 Series | 34 lbs (15.5 kg) |
| 2412/2424/3216/3232 Series |
| | 89 lbs (41 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Listings | UL, CUL |
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-040308-D13) |