| DMS 1600, DMS 2000, DMS 3200, and DMS 3600 Series |
|
| Video — DMS DVI |
|---|
| Routing | |
| 1600 Series | From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs |
| 2000 Series | From 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs |
| 3200 Series | From 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs |
| 3600 Series | From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs |
| Gain | Unity |
| Resolution range | Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz |
| Signal Type | Single-link DVI digital video signals are supported. |
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE | The DMS DVI Series boards are not HDCP compliant. |
|
| Digital audio | Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content |
| Consumer Electronics Control (CEC) | Not supported |
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP | Not supported |
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate | 4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock | 165 MHz |
| Standards | DVI 1.0 |
| Switching speed | 200 ns, max. |
|
| Video input — DMS 44 DVI and DMS 4i DVI input boards |
|---|
| Number/signal type | 4 digital RGB single link DVI-D per input board |
| Connectors | 4 female DVI-I (digital only) per input board |
| Equalization | Automatic |
| Input cable length | 100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color |
| NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Video output — DMS 44 DVI and DMS 4o DVI output boards |
|---|
| Number/signal type | 4 digital RGB single link DVI-D per output board |
| Connectors | 4 female DVI-I (digital only) per output board |
| Re-clocking | Automatic |
| Output cable length | 50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p |
| Peripheral device power | 250 mA per output |
|
| Optical specifications — fiber optic boards |
|---|
| NOTE | The I/O boards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11. |
|
| Number/type | 4 multimode fiber optic inputs and outputs (4 Tx and 4 Rx) per I/O board |
| Connectors | 4 or 8 LC connectors per I/O board |
| Operating distance | 300 m (985') |
| NOTE | Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength | 850 nm for multimode (MM) |
| Transmission power | -5 dBm, typical |
| Maximum receiver sensitivity | -12 dBm, typical |
| Optical loss budget | 8 dB, maximum |
| Maximum channel data rate | 6.25 Gbps |
|
| Video — fiber optic (DMS 44, DMS 4i, and DMI 4o fiber boards) |
|---|
| Routing | |
| 1600 Series | 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs |
| 2000 Series | 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs |
| 3200 Series | 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs |
| 3600 Series | 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs |
|
| Video input — DMS 44 fiber and DMS 4i fiber input boards |
|---|
| NOTE | The fiber optic input boards require connection to a DFX 100 Tx transmitter. |
|
| Number/signal type | 4 fiber optic, multimode (OM3 or OM4 fiber recommended) |
| Connectors | 4 LC connectors |
| Input cable length | 300 m (985') |
| NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Video output — DMS 44 fiber and DMS 4o fiber output boards |
|---|
| NOTE | The fiber optic output boards require connection to a DFX 100 Rx receiver. |
|
| Number/signal type | 4 fiber optic, multimode (OM3 or OM 4 recommended) |
| Connectors | 4 LC connectors per board |
| Output cable length | 300 m (985') |
|
| Communications — switcher host ports |
|---|
| Serial host control port | 1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector |
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| 9-pin female D connector | |
| RS-232 | 2 = Tx, 3 = Rx, 5 = Gnd |
| RS-422 | 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+ |
| USB control ports | 1 front panel female mini USB B |
| USB standards | USB 2.0, low speed |
| Ethernet control port | 1 RJ-45 female |
| Ethernet data rate (for network communication) | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet |
| Ethernet default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off |
| Web server | Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet |
|
| General |
|---|
| Power supply | |
| DMS 1600 | Internal: 1 or 2* (positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is optional. |
| DMS 2000 | Internal: 1
Input: 100-240 VAC, 50-60 Hz |
| DMS 3200 | Internal: 1
Input: 100-240 VAC, 50-60 Hz |
| DMS 3600 | Internal, 2*(positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is standard. |
| Power consumption | |
| DMS 1600 | Primary power supply: 97 watts
Primary and redundant supplies: 107 watts
Measured fully loaded with (4) 4x4 I/O boards |
| DMS 2000 | 116 watts
Measured fully loaded with (5) 4x4 I/O boards |
| DMS 3200 | 174 watts
Measured fully loaded with (8) 4x4 I/O boards |
| DMS 3600 | 212 watts
Measured fully loaded with (9) 4x4 I/O boards |
| I/O boards |  |
| Ambient temperature/humidity | Storage: -40 to +158°F (-40 to +70°C) / 10% to 90%, noncondensing
Operating: +32 to +122°F (0 to +50°C) / 10% to 90%, noncondensing |
| Cooling | Fan, right to left (as viewed from front panel) |
| Thermal dissipation, full load | |
| DMS 1600 | Primary power supply: 332 BTU/hr
Primary and redundant supplies: 366 BTU/hr
Measured fully loaded with (4) 4x4 I/O boards |
| DMS 2000 | 398 BTU/hr
Measured fully loaded with (5) 4x4 I/O boards |
| DMS 3200 | 596 BTU/hr
Measured fully loaded with (8) 4x4 I/O boards |
| DMS 3600 | 724 BTU/hr
Measured fully loaded with (9) 4x4 I/O boards |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | |
| DMS 1600 | 7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.) |
| DMS 2000 | 5.2" H x 17.0" W x 12.2" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.) |
| DMS 3200 | 8.7" H x 17.0" W x 12.2" D (5U high, full rack wide)
(22.1 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.) |
| DMS 3600 | 14.0" H x 17.0" W x 12.25" D (8U high, full rack wide)
(35.6 cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.) |
| Product weight with boards installed | |
| DMS 1600 | |
| With primary power supply only | 26.9 lbs (12.2 kg) |
| With both primary and redundant power supplies | 27.9 lbs (12.6 kg) |
| DMS 2000 | 16.4 lbs (7.5 kg) |
| DMS 3200 | 27.1 lbs (12.3 kg) |
| DMS 3600 | 38.5 lbs (17.5 kg) |
| Shipping weight with boards installed | |
| DMS 1600 | 32 lbs (15 kg) |
| DMS 2000 | 21 lbs (10 kg) |
| DMS 3200 | 33 lbs (15 kg) |
| DMS 3600 | 48 lbs (22 kg) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | |
| DMS 1600 and DMS 3600 | CE, C-tick, FCC Class A, ICES, KC, VCCI |
| DMS 2000 and DMS 3200 | CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental | Complies with the appropriate requirements of RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (5616-D11) |