| FOX II DP Series |
| NOTE | The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. |
|
| NOTE | These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825. |
|
|
| Optical fiber interconnection between transmitter and receiver |
|---|
| Number/type | 2 fiber optic |
| Connectors | 2 LC connectors |
| Operating distance | |
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with an SM unit |
| Multimode | 300 m (984') with 62.5 µm OM1 multimode (MM) cables with an MM unit
1 km km (3280') with 50 µm OM2 multimode (MM) cables with an MM unit
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode cable with an MM unit |
| NOTE | Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength | 850 nm for multimode, 1310 nm for singlemode |
| Data rate | 4.25 Gbps |
| Transmission power | |
| Singlemode | -5 dBm, typical |
| Multimode | -5 dBm, typical |
| Maximum receiver sensitivity | |
| Singlemode | -18 dBm, typical |
| Multimode | -12 dBm, typical |
| Optical loss budget | |
| Singlemode | 13 dB, maximum |
| Multimode | 7 dB, maximum |
|
| Video |
|---|
| Maximum data rate | Up to 10.8 Gbps (2.7 Gbps per lane) |
| Maximum resolution | Up to 1920x1200 @ 60Hz, 1080p @ 60Hz and 2560x1600 @ 60Hz |
| Color bit depth | 12 bits for resolutions up to 1080p. 10 bits for all resolutions above 1080p. |
| EDID | Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables. |
| Standards | DisplayPort 1.1a |
|
| Video input and loop through — transmitters |
|---|
| Number/signal type | 1 DisplayPort input
1 DisplayPort loop-through |
| Connectors | 1 female DisplayPort input
1 female DisplayPort loop-through |
|
| Video output — receiver |
|---|
| Number/signal type | 1 DisplayPort |
| Connectors | 1 female DisplayPort |
| Video delay | 2 frames |
|
| Audio |
|---|
| Gain | |
| Range | Adjustable, -18 dB to +10 dB |
| Default | |
| Captive screw connector | Balanced output: 0 dB; unbalanced output: -6 dB |
| Mini stereo jack | Unbalanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | 0.10% @ 1 kHz at nominal level |
| S/N | >90 dB at maximum output (unweighted) |
| CMRR | 65 dB @ 20 Hz to 20 kHz |
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) |
| Sampling rate | 32 kHz, 44.1 kHz, 48 kHz |
|
| Audio input — transmitter |
|---|
| Number/signal type | 1 digital audio, de-embedded from DisplayPort or
2 inputs:
1 balanced stereo
1 unbalanced stereo or 2 unbalanced mono |
| Connectors | 1 female DisplayPort (shared with video input)
(1) 3.5 mm stereo jack
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance | ≥10k ohms unbalanced, ≥20k ohm balanced |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level | +15.0 dBu, balanced at 1% THD+N (5-pole); +6 dBV, unbalanced (3.5 mm stereo) |
| Source formats | PCM, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby® Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, DTS-HD Master Audio, DTS-HD, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — receiver |
|---|
| Number/signal type | 1 digital audio, embedded with DisplayPort output
2 buffered outputs:
1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono |
| Connectors | 1 female DisplayPort (shared with video output)
(1) 3.5 mm stereo jack
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Nominal level | +4 dBV (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level (Hi-Z) | +15.0 dBu, unbalanced at 1% THD+N |
| Audio delay | 2 frames |
| Source formats | PCM, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby® Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, DTS-HD Master Audio, DTS-HD, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 |
|
| Audio return input — receivers |
|---|
| Number/signal type | 1 stereo/mono, balanced or unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole
|
| Impedance | ≥10k ohms unbalanced, ≥20k ohm balanced |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level (Hi-Z) | +15.0 dBu, balanced at 1% THD+N |
| Audio delay | 2 frames |
|
| Audio return output — transmitter |
|---|
| Number/signal type | 1 stereo/mono, balanced or unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole
|
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level (Hi-Z) | +15.0 dBu, balanced at 1% THD+N |
| Audio delay | 2 frames |
|
| Control/remote |
|---|
| Serial control ports on each unit (transmitter and receiver) |
| Control | 1 female mini USB port B (front panel)
1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel |
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel |
| Baud rate and protocol | |
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Pass-through | 9600 to 115,200 baud |
| Serial control pin configuration | Captive screw: 4 = Tx, 5 = Rx, 3 = GND |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
| IR control port | (1) 3.5 mm captive screw connector, 5 pole (connector is shared with RS-232 pass thru) TTL level (0 to 5V) modulated infrared control from 30kHz to 40 kHz |
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx |
|
| General |
|---|
| Power supply | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 2 A, 24 watts |
| Power consumption | |
| Transmitter | |
| Device | 16.5 watts, 12 VDC |
| Device and power supply | 19.4 watts, 100 - 240 VAC, 50-60 Hz |
| Receiver | |
| Device | 14.2 watts, 12 VDC |
| Device and power supply | 15.8 watts, 100 - 240 VAC, 50-60 Hz |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on top and side panels |
| Thermal dissipation | |
| Transmitter | |
| Device | 53.8 BTU/hr |
| Device and power supply | 63.7 BTU/hr |
| Receiver | |
| Device | 47.0 BTU/hr |
| Device and power supply | 52.6 BTU/hr |
| Mounting | |
| Rack mount | Yes, with optional rack shelf |
| Furniture mount | Yes, with optional under desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | |
| Transmitter | 1.0" H x 8.7" W x 6.0" D (half rack wide)
(2.5 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Receiver | 1.0" H x 8.7" W x 6.0" D (half rack wide)
(2.5 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Product weight | |
| Transmitter | 2.3 lbs (1.0 kg) |
| Receiver | 2.3 lbs (1.0 kg) |
| Shipping weight | |
| Transmitter | 3 lbs (2 kg) |
| Receiver | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.1-120914-D4) |