| IPCP 505 |
|
| Ethernet control interface |
|---|
| Connectors | 1 RJ-45 female connector |
| Data rate | 10/100Base-T, half/full duplex with autodetect |
| Protocols | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet |
| Default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
| Web server | Up to 200 simultaneous sessions
975 MB nonvolatile user memory |
| Program control | Extron Global Configurator for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet |
| Global Viewer requirements | Microsoft® Internet Explorer® ver. 6 or higher |
|
| Serial control interface |
|---|
| Quantity/type | 2 bidirectional RS-232, RS-422, RS-485
6 bidirectional RS-232 |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole
(6) 3.5 mm captive screw connectors, 3 pole |
| Baud rate and protocol | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), or even or odd parity |
| NOTE | The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control. |
|
| Pin configurations | |
| Serial, 5-pole captive screw |
| RS-232 (default) | Pin 1 = Tx, 2 = Rx, 3 = GND, 4 = RTS, 5 = CTS |
| RS-422 | Pin 1 = Tx-, 2 = Rx-, 3 = GND, 4 = Tx+, 5 = Rx+ |
| RS-485 | Pins 1 and 2 (tied together) = data-, 3 = GND, 4 and 5 (tied together) = data+ |
| Serial, 3-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = GND |
|
| Flex I/O control interface |
|---|
| Quantity/type | 4 analog input or digital input/output (configurable) |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Digital inputs | |
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC |
| Input impedance | 28k ohms |
| Programmable pullup | 2k ohms to +5 VDC |
| Threshold low to high | Programmable range: 100 mV to 24 VDC, default = 2 VDC |
| Threshold high to low | Programmable range: 100 mV to 24 VDC, default = 1 VDC |
| Digital outputs | 250 mA sink from 24 VDC max. |
| Analog inputs | 12 bit A/D, 0 to 24 VDC |
| Pin configurations | 1, 2, 3, 4 = flex I/Os 1, 2, 3, 4; 5 = GND |
|
| Control — IR/serial ports |
|---|
| Quantity/type | 8 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 1 MHz |
| Connectors | (4) 3.5 mm captive screw connectors, 4-pole |
| Baud rate and protocol (RS-232) | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), or even or odd parity |
| Pin configurations | For each port, pin 1 = signal, 2 = GND |
| IR output carrier frequency | 30 kHz to 1 MHz |
| IR learning carrier frequency | 30 kHz to 1 MHz |
| IR learning capture distance | 2" (5.1 cm) to 12" (30.5 cm) from the front panel |
|
| Relay control interface |
|---|
| Quantity/type | 8 normally open relays |
| Relay control connectors | (4) 3.5 mm captive screw connectors, 4 pole |
| Relay control contact rating | 24 VDC, 1 A |
|
| Switched DC power output |
|---|
| Quantity/type | 4 switched 12 VDC outputs |
| Connectors | (4) 3.5 mm captive screw connectors, 2 pole |
| Power | Maximum 40 watts total |
| Power sense | |
| Range | 0.1 watt to 40 watts |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | 63.3 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Thermal dissipation | 33.2 BTU/hr |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 8.7" W x 10.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 26.7 cm D)
(Depth excludes connectors.) |
| Product weight | 2.5 lbs (1.1 kg) |
| Shipping weight | 5 lbs (3 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL
Meets UL 60950 for safety. |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, KC mark, VCCI |
| Environmental | Complies with the appropriate requirements of RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-011513-D8) |