| MGP 462 |
|
| Video input |
|---|
| Number/signal type | 4 RGBHV, RGBS, RGsB, RGBcvS, component video, S-video, composite video
1 component video (interlaced), S-video, composite video
1 optional digital component video (SDI, SMPTE 259M-C, 270 Mbps), S-video, composite video |
| Connectors | 4 x 5 female BNC for RGB, component video, S-video, composite video
1 x 3 female BNC for component video, S-video, composite video
1 female BNC for composite video
1 female 4-pin mini DIN for S-video
1 female BNC for optional SDI component video |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 100 kHz |
| Vertical frequency | 50 Hz to 120 Hz |
| Resolution range | 640 x 480 to 1400 x 1050, 480p, 576p, and 720p, digitized pixel for pixel; higher resolutions are undersampled |
| Return loss | <-30 dB @ 5 MHz |
|
| Video processing |
|---|
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard (video), 122 MHz standard (RGB) |
| Colors | 16.78 million |
|
| Video output |
|---|
| Number/signal type | 1 scaled RGBHV, RGBS, RGsB, or HD component (YUV) video |
| Connectors | 1 female 15-pin HD, 5 female BNC |
| Nominal level | 1 Vp-p for Y of component video and for G of RGsB
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | 0 V to 1.0 Vp-p |
| Impedance | 75 ohms |
| Vertical frequencies | 50 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, 120 Hz |
| Scaled resolution | 640x4801,2,3,4,5,6, 800x6001, 2,3,4,5,6, 852x4801,2,3,4,5, 1024x7681,2,3,4, 1024x8521,2,3,4, 1024x10241,2,3, 1280x7682, 1280x10241,2, 1360x7652, 1365x7682, 1365x10242, 1366x7682, 1400 x 10501,2, 1600 x 12001,2
HDTV: 480p2, 576p1,5, 720p1,2, 1080i1,2, and 1080p1,2
1 = at 50 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 4 = at 96 Hz, 5 = 100 Hz, 6 = 120 Hz |
| NOTE | For the output resolutions listed below, the total pixel and active pixel values are reduced. The sync timings and line widths are correct, and most displays will recognize the rate correctly.
1600x1200: 1180 active pixels
1080i: 1440 active pixels
1080p: 1440 active pixels |
|
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video |
| Output type | RGBHV, RGBS, RGsB
Tri-level or bi-level on Y channel of component video |
| Input standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB |
| Output level | TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS, RGsB
0.6 Vp-p for component video (tri-level sync) |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.0 Vp-p |
| Polarity | Positive or negative (selectable) |
|
| Control/remote — processor/decoder/scaler |
|---|
| Serial control port | RS-232 or RS-422, 9-pin female D connector |
| Baud rate and protocol | 9600 baud (default), 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 2 = Tx, 3 = Rx, 5 = GND |
| Ethernet control port | 1 RJ-45 female connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, DHCP, ICMP (ping), TCP/IP, Telnet |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer, Telnet |
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on sides and top |
| Mounting | Rack mountable with included brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 17.5" W x 12.0" D (1U high, 1 rack wide)
(4.3 cm H x 44.5 cm W x 30.5 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight | 6.8 lbs (3.1 kg) |
| Shipping weight | 11 lbs (5 kg) |
| DIM weight, international | 12 lbs (6 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, CUL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-031909-D9) |