| WindoWall® MGP 464W Series |
| NOTE | WindoWall® processors are available in packages of 2 or 3 modules. The following specifications are given per unit, not per package. |
|
|
| Video input |
|---|
| Number/signal type | 4 VGA-WUXGA RGBHV, RGBS, RGsB, RsGsBs, RGBcvS, component video (interlaced or progressive), S-video, composite video
4 single link DVI digital video (MGP 464W DI only) |
| Connectors | |
| Inputs 1-4 | (4) x 5 female BNC (all models)
4 female DVI-I (DI models only) |
| Inputs 5-19 | 15 female BNC (disabled) |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 100 kHz |
| Vertical frequency | 50 Hz to 120 Hz |
| Resolution range | 640x480 to 1920x1200*, 480p, 576p, 720p, 1080i, 1080p
*Only the reduced blanking version of the 1920x1200 resolution is sampled at full bit rate. |
| DC offset (max. allowable) | 0.5 V |
|
| Video processing |
|---|
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB) |
| Colors | 16.78 million |
|
| Video output |
|---|
| Number/signal type | 1 scaled RGBHV, RGBS, RGsB, HD YUV component video
1 single link DVI digital video |
| Connectors | 5 female BNC, 1 female DVI-I |
| Nominal level | 1 Vp-p for Y of component video and for G of RGsB
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | 0.0 V to 1.0 Vp-p |
| Impedance | 75 ohms |
| Vertical frequencies | 24 Hz, 50 Hz, 59.94 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, 120 Hz |
| Scaled resolution | 640x4801,2,3,4,5,6, 800x6001,2,3,4,5,6, 852x4801,2,3,4,5, 1024x7681,2,3,4, 1024x8521,2,3,4,
1024x10241,2,3, 1280x7681,2, 1280x8001,2,3, 1280x10241,2, 1360x7651,2, 1360x7681,2, 1365x7681,2, 1365x10241,2, 1366x7681,2, 1400x10501,2, 1440x9001,2,3, 1600x12001,2, 1680x10502, and 1920x12001,2
HDTV: 480p2,8, 576p1, 720p1,2,8, 1080i1,2,8, and 1080p1,2,7,8
1 = at 50 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 4 = at 96 Hz, 5 = at 100 Hz, 6 = at 120 Hz, 7 = 24 Hz,
8 = 59.94 Hz |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±25 mV with input at 0 offset |
| Switching type | Triple-Action |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs, RGBcvS, YUV (tri-level or bi-level on Y channel) |
| Output type | RGBHV, RGBS, RGsB, YUV (tri-level or bi-level on Y channel) |
| Input standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB |
| Output level | 0.6 Vp-p for component video (tri-level sync)
0.3 Vp-p for component video bi-level sync or RGsB
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Polarity | Positive or negative (selectable) |
|
| Control/remote — processor/decoder/scaler |
|---|
| Serial control ports | (1) RS-232 or RS-422, female 9-pin D connector |
| Baud rate and protocol | 300 to 115200 baud (default: 9600), 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations — 9-pin D connector |
| RS-232 | 2 = Tx, 3 = Rx, 5 = GND |
| RS-422 | 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ |
| Ethernet control port | 1 female RJ-45 connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet |
| Program control | Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer, Telnet
Extron WindoWall® Console application software |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | 50.0 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan, right to left (as viewed from the front panel) |
| Thermal dissipation | 148 Btu/hr |
| Mounting | Rack mountable with included brackets |
| Enclosure type | Metal |
| Enclosure dimensions (per unit) | 3.4" H x 17.5" W x 12.0" D (2U high, 1 rack wide)
(8.6 cm H x 44.5 cm W x 30.5 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight | 8.5 lbs (3.9 kg) |
| Shipping weight | 18 lbs (9 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental | Complies with the appropriate requirements of WEEE. |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-091611-D20) |