Les mini-émetteurs et récepteurs de la gamme MTP AV d'Extron font partie de la gamme VersaTools® qui regroupe des produits compacts et économiques présentés en boîtier rack 1/8 qui s'intègrent facilement dans les installations audiovisuelles neuves ou existantes. Ces émetteurs et récepteurs sont utilisables avec un câble paires torsadées CAT 5, 5e ou un câble UTP AV Extron Skew-Free™ de 300 mètres ou plus. Le faible encombrement des MTP autorise presque tous les modes de montage : en rack, sous une table ou un plan de travail ou à côté d'un écran. Les émetteurs existent aussi en version AAP (plaque d'adaptation architecturale) double espace et en version européenne 45 mm.

Caractéristiques techniques

MTP AV Series
Video
Gain	Unity
Differential phase error	<1.0° at 3.58 MHz and 4.43 MHz
Differential gain error	<1.0% at 3.58 MHz and 4.43 MHz
Video input
Number/signal type
MTP T AV Series	1 composite video
MTP T SV Series	1 S-video
MTP R AV/SV Series	1 set of proprietary analog signals
Connectors
MTP T AV Series	1 female BNC
MTP T AV AAP	1 female RCA
MTP T SV Series	1 female 4-pin mini DIN
MTP R AV/SV Series	1 female RJ-45
Nominal level	1 Vp-p for Y of S-video and for composite video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 V to 1.5 Vp-p with no offset
Impedance	75 ohms
Return loss	<-30 dB, DC @ 10 MHz
DC offset (max. allowable)	100 mV
Video output
Number/signal type
MTP T AV/SV Series, MTP T AAP Series	1 set of proprietary analog signals
MTP R AV Series	1 composite video
MTP R SV Series	1 S-video
Connectors
MTP T AV/SV Series	1 female RJ-45
MTP T AAP Series	1 female RJ-45 on a 3” (7.6 cm) pigtail
MTP R AV Series	1 female BNC
MTP R SV Series	1 female 4-pin mini DIN
Nominal level	1 V p-p for Y of S-video and for composite video 0.3 V p-p for C of S-video
Minimum/maximum levels	0.3 V to 1.5 Vp-p
Impedance	75 ohms
Return loss	<-35 dB @ 5 MHz
DC offset	±20mV with input at 0 offset
Sync
Standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain
RCA models	Unbalanced output: 0 dB (unity)
All other models	Unbalanced output: 0 dB (unity); balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.25 dB
THD + Noise	0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N
RCA models	>90 dB, at maximum output (unweighted)
All other models w/audio	>90 dB, balanced at maximum output (unweighted)
Crosstalk	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>75 dB @ 1 kHz
CMRR	>34 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type
MTP T AV, MTP T SV A	1 stereo, balanced/unbalanced
MTP T AV/SV A RCA, MTP T AAP, MTP T 45 Series	1 stereo, unbalanced
MTP R Series	1 set of proprietary analog signals
Connectors
MTP T AV, MTP T SV A	(1) 3.5 mm captive screw connector, 5 pole
MTP T AV/SV A RCA, MTP T AAP	1 pair of female RCA
MTP R Series	1 female RJ-45 (shielded)
Impedance	>5.6k ohms ±5% unbalanced, >10k ohms ±5% balanced
Nominal level	-10 dBV (0.32 Vrms)
Maximum level	>+2.4 dBu (balanced or unbalanced) at 1%THD+N
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
MTP T Series	1 set of proprietary analog signals (all MTP T models)
MTP R AV, MTP R SV A	1 stereo or dual mono, balanced/unbalanced
MTP R AV/SV A RCA	1 stereo or dual mono, unbalanced
Connectors
MTP T Series	1 female RJ-45 (shielded)
MTP T AAP Series	1 female RJ-45 on a 3" (7.6 cm) pigtail
MTP R AV, MTP R SV A	(1) 3.5 mm captive screw connector, 5 pole
MTP R AV/SV A RCA	1 pair of female RCA
Impedance
MTP R AV, MTP R SV A	50 ohms unbalanced, 100 ohms balanced
MTP R AV/SV A RCA	50 ohms unbalanced
Gain error	±0.1 dB channel to channel
Maximum level (Hi-Z)	>+3.3 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm)	>+2.0 dBm, balanced or unbalanced at 1%THD+N
General
Recommended cable type	CAT5/5e/6 (shielded or unshielded)
External Power supply	100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated
Power input requirements	12 VDC, 0.2 A
NOTE     If the distance between the transmitter and receiver is less than 200' (61 m) and if the internal jumper is in setting 2, you can connect a power supply to only one device in a transmitter/receiver pair. If the distance between transmitter and receiver is greater than 200' (61 m) or if the internal jumper is in setting 1 (default), connect a power supply to each device.
Ambient temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount
MTP T AAP Series	Yes, with optional rack panel
All other models	Yes, with optional 1U rack shelf
Furniture or wall mount
MTP T AAP Series	Yes, with optional AAP mounting plates
All other models	Yes, with optional brackets.
Enclosure type	Metal
Enclosure dimensions (Depths exclude connectors and cables.)
MTP T AAP Series
Faceplate	1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate)
Transmitter	1.35" H x 2.7" W x 1.3" D (3.4 cm H x 6.9 cm W x 3.3 cm D)
All other models	1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide) (4.2 cm H x 5.6 cm W x 7.6 cm D)
Product weight	1.0 lbs (0.5 kg)
Shipping weight	3 lbs (2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-061112-D23)