| P/2 DA2xi, P/2 DA2xi MT |
|
| Video |
|---|
| Gain | |
| P/2 DA2xi | Output: 0 dB or 0.4 dB, selectable
Local monitor output: unity |
| P/2 DA2xi MT | Output: 0 dB or 0.6 dB, selectable
Local monitor output: unity |
| Peaking | |
| P/2 DA2xi | Output: selectable, 0.7 dB or 1.4 dB at 100 MHz
Local monitor output: fixed |
| P/2 DA2xi MT | Output: selectable, 0 dB or 0.6 dB at 100 MHz
Local monitor output: fixed |
| Bandwidth | 350 MHz (-3 dB) |
|
| Video input |
|---|
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video |
| Connectors | 1 female 15-pin HD |
| Pin connections | ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
Pin 9 is floating. |
| Nominal level | 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 135 kHz |
| Vertical frequency | 30 Hz to 170 Hz |
| Return loss | <-38 dB @ 5 MHz |
| DC offset (max. allowable) | 1.0 V |
| Input coupling | DC |
|
| Video output |
|---|
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video (follows input type)
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (ID bits are passed through.) |
| Connectors | 2 female 15-pin HD |
| Nominal level | 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain |
| Minimum/maximum levels | Analog, 0.3 V to 1.5 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
| Output type | RGBHV, RGBS, RGsB, RsGsBs |
| Input level | 1.5 V to 5.0 Vp-p |
| Output level | TTL, 5 Vp-p, unterminated |
| Input impedance | |
| P/2 DA2xi | <1k ohm (default) or 10k ohms, selectable |
| P/2 DA2xi MT | 510 ohms (fixed) |
| Output impedance | 75 ohms (default) or 50 ohms, selectable |
| Max. propagation delay | 60 ns |
| Max. rise/fall time | 4 ns |
| Polarity | Positive or negative (follows input) |
|
| Audio — P/2 DA2xi MT only |
|---|
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, +0.05 dB, -0.1 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 dB (balanced) at maximum output |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >80 dB @ 1 kHz, >60 dB @ 20 kHz |
| CMRR | >67 dB @ 20 Hz to 20 kHz |
|
| Audio input — P/2 DA2xi MT only |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connector | (1) 3.5 mm stereo jack, female; tip (L), ring (R), sleeve (GND) |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Nominal level | -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output |
| Maximum level | >+10 dBV (3.16 V) (unbalanced) at 1%THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — P/2 DA2xi MT only |
|---|
| Number/signal type | 1 stereo, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Nominal level | -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output |
| Maximum level (Hi-Z) | >+15 dBu (4.36 V), balanced at 1% THD+N, with external power supply |
| Maximum level (600 ohm) | >+9 dBm (2.18 V), balanced at 1% THD+N, with external power supply |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50-60 Hz, 6 watts, external; to 12 VDC, 0.5 A, regulated |
| Power input requirements | 12 VDC, 0.2 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Furniture mount | |
| P/2 DA2xi | Yes, with optional under-desk mounting kit |
| P/2 DA2xi MT | Yes, with included under-desk mount kit or optional through-desk mount kit |
| Pole mount | Yes, with optional pole mount kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight | 0.5 lbs (0.3 kg) |
| Regulatory compliance | CE, C-tick, c-UL, UL, FCC Class A, ICES, KCC, VCCI |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (4450-D15) |