| P/2 DA4xi, P/2 DA6xi |
|
| Video |
|---|
| Gain | 0 dB or +3 dB (when input is 0.7 Vp-p, output is 0.7 V or 1.0 V), switchable |
| Bandwidth | 350 MHz (-3 dB), fully loaded |
|
| Video input |
|---|
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video |
| NOTE | These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V. |
|
| Connectors | 1 female 15-pin HD (optional Mac/VGA adapters are available) |
| Pin connections | ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
The pin 9 connection is passed through to output 1. |
| Nominal level | 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 135 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-40 dB @ 5 MHz |
| Input coupling | DC |
|
| Video output |
|---|
| Number/signal type | |
| P/2 DA4xi | 4 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type) |
| P/2 DA6xi | 6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type) |
| NOTE | These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V. |
|
| Connectors | |
| P/2 DA4xi | 4 female 15-pin HD |
| P/2 DA6xi | 6 female 15-pin HD |
| Nominal level | 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync |
| Output type | RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input) |
| NOTE | These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. |
|
| Input level | 1.8 V to 5.0 Vp-p |
| Output level | TTL: 5.0 Vp-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 50 ohms |
| Max. propagation delay | 60 ns |
| Max. rise/fall time | 2 ns |
| Polarity | Positive or negative (follows input) |
|
| General |
|---|
| Power | Internal
100-240 VAC, 50-60 Hz, 12 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.6" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.1 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Product weight | 2.0 lbs (0.9 kg) |
| Shipping weight | 3 lb (2 kg) |
| DIM weight | |
| USA/Canada | 3.7 lbs (1.7 kg) |
| International | 4.3 lbs (2.0 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, KCC, VCCI |
| Environmental | Complies with the appropriate requirements of RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.1-062314-D14) |