| ISM 824 |
|
| Video |
|---|
| Routing | 8 x 2 matrix up to 8 x 8 matrix, depending on model and configuration |
| Gain | Unity (outputs 1 and 2) |
| Bandwidth | 450 MHz (-3 dB), fully loaded (main unit, outputs 1 and 2)
350 MHz (-3 dB) for wideband single/dual boards |
|
| Video input — main unit |
|---|
| Number/signal type | 8 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (interlaced or progressive), S-video, composite video |
| Connectors | 8 x 5 female BNC |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Horizontal frequency | 15 kHz to 108 kHz |
| Vertical frequency | 50 Hz to 120 Hz |
|
| Sync — main unit |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video |
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video (follows input) (outputs 1 and 2) |
| Standards | NTSC 3.58, PAL |
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level | AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
|
| Sync — ISM RGB |
|---|
| Output type | RGBHV, RGBS, RGsB
Bi-level or tri-level on Y, R-Y, B-Y channels (component video) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Output level | TTL: 5.0 Vp-p, unterminated |
|
| Sync — ISM VS |
|---|
| Input type | Pass-through RGBHV, RGBS, RGsB |
| Output type | RGBHV, RGBS, RGsB
Bi-level on Y, R-Y, B-Y channels (component video) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Output level | TTL: 5.0 Vp-p, unterminated |
|
| Video output — wideband outputs: |
|---|
| • Main unit outputs 1 and 2 (pass-through) | |
| • ISM 1WB single-output wideband board | |
| • ISM 2WB dual-output wideband board | |
| Number/signal type | RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (progressive/interlaced), S-video, composite video (follows input type) |
| Connectors | |
| Wideband (main unit) | 2 x 5 female BNC |
| ISM 1WB | 1 x 5 female BNC |
| ISM 2WB | 2 female 15-pin HD |
| Nominal level | 1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video |
| Minimum/maximum levels | 0.0 V to 0.7 Vp-p (follows input) |
|
| Video processing — ISM DVI |
|---|
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB) |
| Colors | 16.78 million |
|
| Video output — ISM DVI scaled output |
|---|
| Number/signal type | 1 scaled DVI-D |
| Connector | 1 female DVI-D |
| Nominal level | 0.8 Vp-p |
| Impedance | 75 ohms |
| Scaled resolution | 640x4804,5,6, 800x6004,5,6, 852x4804,5,6, 1024x7684,5,6, 1024x8524,5,6, 1024x10244,5,6, 1280x7684,5,6, 1280x8004,5, 1280x10244,5,6, 1360x7654,5,6, 1365x7684,5,6, 1365x10244,5,6, 1366x7684,5,6, 1400x10504,5, 1440x9005,7, 1600x12004,5, 1680x10505, 1920x12005
HDTV: 480p5,8, 576p4, 720p4,5,8, 1080i4,5,8, 1080p1,2,3,4,5,8, 1080p Sharp
1 = 24 Hz, 8 = at 59.94 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 60 Hz, 6 = 72 Hz, 7 = 75 Hz |
|
| Video processing — ISM HDSDI |
|---|
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB) |
| Colors | 16.78 million |
|
| Video output — ISM HDSDI scaled outputs |
|---|
| Number/signal type | 1 scaled HD-SDI (SMPTE 292M) |
| Connector | 1 female BNC |
| Nominal level | 0.8 Vp-p |
| Impedance | 75 ohms |
| Scaled resolution | 720p1,2,3,4,5,6, 1080i4,5,6, 1080p1,2,3
1 = 24 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 59.94 Hz, 6 = 60 Hz |
|
| Video — ISM MTP UT 4DA |
|---|
| Gain | Unity |
|
| Video output — ISM MTP UT 4DA |
|---|
| Number/signal type | 4 sets of proprietary analog signals |
| Connectors | 4 female RJ-45 |
| Maximum resolution | 1920x1200 |
|
| Video — ISM SC |
|---|
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB) |
| Colors | 16.78 million |
| Horizontal filtering | 4 levels |
| Flicker filtering | 4 levels |
|
| Video output — ISM SC |
|---|
| Number/signal type | 1 NTSC/PAL RGsB, component video (with bi-level sync), or S-video
1 NTSC/PAL composite video |
| Connectors | 3 female BNC
1 female BNC |
| Nominal levels | 1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video |
| Minimum/maximum levels | 0.0 V to 1.0 Vp-p (follows input) |
| Impedance | 75 ohms |
|
| Sync — ISM SC |
|---|
| Output type | RGsB, bi-level for component video |
| Standards | NTSC 3.58, PAL |
| Output impedance | 75 ohms |
| Output level | NTSC or PAL standard levels |
|
| Audio — main unit |
|---|
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
|
| Audio — ISM MTP UT 4DA |
|---|
| Number/signal type | 4 sets of proprietary signals |
| Connectors | 4 female RJ-45 (shared with video) |
| Gain | Unbalanced output: 0 dB (unity; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±1 dB |
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >70 dB at maximum output (unweighted) |
| CMRR | <-43 dB @ 20 Hz to 20 kHz |
|
| Audio input — main unit |
|---|
| Number/signal type | 8 stereo, balanced/unbalanced |
| Connectors | (8) 3.5 mm captive screw connectors, 5 pole |
|
| Audio output — main unit |
|---|
| Number/signal type | 2 (base model, upgradeable to 8) stereo, balanced/unbalanced |
| Connectors | (2, upgradeable to 8) 3.5 mm captive screw connectors, 5 pole |
|
| Control/remote — switcher |
|---|
| Serial host control port | 1 rear panel RS-232 or RS-422, female 9-pin D connector
1 front panel RS-232 2.5 mm mini stereo jack |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| 9-pin D connector | RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = TX+, 8 = RX+ |
| 2.5 mm mini stereo jack | RS-232: tip = TX, ring = RX, sleeve = GND |
| Ethernet control port | 1 female RJ-45 connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, HTTP, Telnet |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Netscape Navigator, Telnet |
|
| Control/remote — ISM MTP UT 4DA (pass-through) |
|---|
| Serial control | 4 RS-232 on (2) 3.5 mm captive screw connectors, 3 pole:
2 bidirectional (via outputs 1 and 3), 2 unidirectional (via outputs 2 and 4) |
| Serial control pin configuration | 1 = TX, 2 = RX, 3 = GND |
| Baud rates | Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.) |
| Protocol | Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none |
| NOTE | Protocol is mirrored between the transmitter board and the receiver. |
|
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50-60 Hz, 75 watts, internal |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan, left to right (as viewed from the front panel) |
| Mounting | |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | 5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 44.4 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight | |
| Main unit | 14 lbs (6.3 kg) |
| Shipping weight | |
| Main unit | 21 lbs (10 kg) |
| Regulatory compliance | |
| (7.6-092409-D9) |