Les émetteurs TP T 15HD 45 et TP T A 45 d'Extron sont prévus pour être installés en mosaïque 45 mm et fonctionnent par paire pour transmettre des signaux vidéo haute résolution et audio stéréo via un câble paires torsadées. Ils permettent de créer un système très performant et économique pour la transmission des signaux vidéo-informatiques et audio stéréo sur une distance max. de 300 mètres à l'aide d'un câble paires torsadées CAT 5 ou d'un câble UTP A/V Skew-Free Extron. Les deux modèles sont conçus pour être installés côte-à-côte en mosaïque 45 mm adapté aux boîtiers muraux, chemins de câbles et boîtiers de sol aux normes européennes.

Caractéristiques techniques

TP Series Transmitters
Video — video models
Number/signal type	1, 2, or 4 sets of proprietary analog signals
Connectors	1, 2, or 4 shielded RJ-45 female
TP T 15HD 45	(1) 8-pin spring force captive wire connector
All other models	1, 2, or 4 shielded RJ-45 female
Video input — video models
Number/signal type
TP T 15HD A, TP T 15HD 45	1 analog RGBHV, RGBS, RGsB, component video or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source
TP T 15HD AV	1 analog RGBHV, RGBS, RGsB component video or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source and 1 NTSC/PAL/SECAM composite video
TP T BNC DA4	1 analog RGBHV, RGBS, RGsB, component video or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source
NOTE     These products accept component video with bi-level sync only.
Connectors
TP T 15HD A, TP T 15HD 45	(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.)
TP T 15HD AV	(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.) 1 RCA female
TP T BNC DA4	5 BNC female
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 130 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-30 dB @ 5 MHz
DC offset (max. allowable)	100 mV
Video output — refer to the TP Receivers Family User's Manual, part #68-547-02.
Audio — audio models
Number/signal type	1 or 2 sets of analog proprietary signals
Connectors
TP T A 45	(1) 2-pin direct insertion captive screw connector
All other models	1 or 2 female RJ-45
Frequency response	20 Hz to 20 kHz, ±0.05 dB
THD + Noise	0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N	>63 dB at maximum output (unweighted)
Crosstalk	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>66.6 dB @ 1 kHz
CMRR	>33 dB @ 20 Hz to 20 kHz
Audio input — audio models
Number/signal type
TP T 15HD A, TP T A 45	1 stereo, unbalanced
TP T 15HD AV	2 stereo, unbalanced
Connectors
TP T 15HD A, TP T A 45	(1) 3.5 mm mini jack
TP T 15HD AV	(1) 3.5 mm mini jack, 2 female RCA
Impedance	5k ohms, unbalanced, DC coupled
Nominal level	-10 dBV (316 mV)
Maximum level	+5.5 dBu, (unbalanced) at 1%THD+N
CMRR	>75 dB @ 20 Hz to 20 kHz
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — refer to the TP Receivers Family User's Manual, part #68-547-02.
General
Recommended cable type	Enhanced Skew-Free™ AV UTP Cable or CAT 5/5e/6 (shielded or unshielded)
Power supply
TP T 15HD A, TP T 15HD AV	External Output: 15 VDC, 0.8 A Or provided by the TP R receiver for up to 300' (91.4 m)
TP T BNC DA4	External Output: 15 VDC, 0.8 A
TP T 15HD 45	External Output: 12 VDC, 1.0 A
TP T A 45	Shared with the TP T 15HD 45 transmitter
NOTE     The TP R 15HD A receiver does not provide power to any twisted pair transmitter.
Ambient temperature/humidity	Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount
TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4	Yes, with the optional TP rack shelf mounting kit and an optional standard rack shelf kit
Furniture mount
TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4	Yes, with an optional under-desk or through-desk mounting kit
TP T 15HD 45, TP T A 45	No, but mountable in a 45 mm x 45 mm opening in common European wall boxes, floor boxes, or cable channel systems
Enclosure type	Metal
Enclosure dimensions
TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4	1.3" H x 6.8" W x 4.5" D (<1U high, <half rack width) (3.3 cm H x 17.3 cm W x 11.4 cm D) (Depth excludes connectors.)
TP T 15HD 45, TP T A 45
Plate	1.8" H x 1.8" W x 0.8" D (4.5 cm H x 4.5 cm W x 2.0 cm D)
Device	1.1" H x 1.6" W x 1.2" D (2.9 cm H x 4.1 cm W x 3.0 cm D) (Depth excludes front and rear panel connectors and controls.)
Product weight
TP T 15HD A, TP T 15HD AV	0.8 lbs (0.4 kg)
TP T BNC DA4	0.9 lbs (0.4 kg)
TP T 15HD 45, TP T A 45	0.3 lbs (0.1 kg)
Shipping weight	3 lbs (2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-100411-D16)