| TPX 88, TPX 88 A |
|
| Video |
|---|
| Routing | 8 x 8 matrix |
| Gain | Unity |
| Crosstalk | -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz |
| Switching speed | 200 ns (max.) |
|
| Video input from an Extron or Inline transmitter |
|---|
| Number/signal type | 8 RGBHV, RGBS, RGsB, HDTV, component video, S-video, composite video |
| Connectors | (8) 8-pin RJ-45 female |
|
| Video output to an Extron or Inline receiver |
|---|
| Number/signal type | 8 RGBHV, RGBS, RGsB, HDTV, component video, S-video, composite video |
| Connectors | (8) 8-pin RJ-45 female |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB |
| Output type | RGBHV, RGBS, RGsB (follows input type) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level | AGC to TTL: 4 to 5 Vp-p, unterminated |
|
| Audio — TPX 88 A only |
|---|
| Routing | 8 x 8 stereo matrix |
| Gain | Unbalanced output: -6 dB; balanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 dB, output 21 dBu, balanced (unweighted) |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >-90 dB @ 1 kHz |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
|
| Audio input — TPX 88 A only |
|---|
| Number/signal type | 8 stereo, balanced/unbalanced |
| Connectors | (8) 8-pin female RJ-45 |
| Impedance | >10k ohms balanced/unbalanced, DC coupled |
| Nominal level | Proprietary signal level |
| Maximum level | Proprietary signal level |
| Input gain adjustment | -18 dB to +24 dB, adjustable per input by RS-232 or front panel |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — TPX 88 A only |
|---|
| Number/signal type | 8 stereo, balanced/unbalanced |
| Connectors | (8) 3.5 mm captive screw connectors, 5 pole (for local audio output)
(1) 8-pin female RJ-45 connector |
| Impedance | 50 ohms unbalanced, 100 ohms balanced
100 ohms for RJ-45 connectors |
| Gain | Selectable output level
Unbalanced -6 dB, balanced 0 dB |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 1% THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1% THD+N |
|
| Control/remote — switcher |
|---|
| Serial control port | RS-232 or RS-422, 5-pole captive screw connector |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Pin configurations | |
| RS-232 | 3 = TX, 5 = RX, 1= GND |
| RS-422 | 2 = TX-, 3 = TX+, 4 = RX-, 5 = RX+, 1= GND |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50/60 Hz, 25 watts, internal, autoswitchable |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Rack mount | Yes, with included brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 17.5" W x 9.5" D (1U high, full rack wide)
4.4 cm H x 44.5 cm W x 24.1 cm D
(Depth excludes connectors and knobs.) |
| Product weight | 3.5 lbs (1.6 kg) |
| Shipping weight | 7 lbs (4 kg) |
| DIM weight | 25 |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Listings | UL, CUL |
| Compliances | CE, FCC Class B, VCCI, AS/NZS, ICES |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.51-020206-D6) |