| VTG 300, VTG 300R |
|
| Video signal characteristics |
|---|
| Dot clock | 108 MHz (max.) |
| Pixel clock accuracy | 100 ppm |
| Horizontal frequency | 15 kHz to 127 kHz |
| Vertical frequency | 30 Hz to 85 Hz |
| Rise/fall time | |
| Composite and S-video | 140 ns |
| All other signal types | <4 ns |
|
| Video output |
|---|
| Number/signal type | 1 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video |
| Connectors | (1) 15-pin HD female (RGB/component)
(1) 4-pin mini DIN female (S-video)
1 BNC female (composite video) |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.286 Vp-p (burst) for C of S-video |
| Minimum/maximum levels | 0.0 V to 1.0 Vp-p |
| Impedance | 75 ohms |
| Resolutions | Computer (VGA–UXGA), video (NTSC, PAL), HDTV, and 16:9 high resolutions |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV for RGB and component video,
±30 mV for S-video and composite video |
|
| Sync |
|---|
| Output type | RGBHV, RGBS, RGsB, RsGsBs (for RGB signals)
Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other component video rates) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SMPTE 170M, SMPTE 274M, SMPTE 293M, SMPTE 295M, SMPTE 296M |
| Output level | 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS |
| Output impedance | 60 ohms |
| Max. rise/fall time | 5 ns (TTL sync) |
| Polarity | Positive or negative (signal dependent) |
|
| Audio |
|---|
| THD + Noise | 0.06% @ 1 kHz at nominal level |
| Flatness | ±0.1 dB |
| Accuracy | ±0.7 dB |
|
| Audio output |
|---|
| Number/signal type | 1 mono, balanced
2 mono, unbalanced |
| Connectors | (1) 3.5 mm mini stereo jack (unbalanced mono left and right, tip-ring-sleeve)
1 female RCA jack (unbalanced, tip-ring)
1 male 3-pin XLR (balanced) |
| NOTE | The XLR output is immune to phantom power. |
|
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Waveforms | Pink noise, white noise, sine wave (fixed/swept), square wave, polarity test |
| Level ranges | Pink noise: -56 dBu to -8 dBu (-58 dBV to -10 dBV) (1.25 mV to 316 mVrms)
Polarity test: -72 dBu to -18 dBu (-74 dBV to -20 dBV) (0.20 mV to 100 mVrms)
All other signal types: -72 dBu to +6 dBu (-74 dBV to +4 dBV) (0.20 mV to 1.6 Vrms) |
| Maximum level (Hi-Z) | >+6 dBu, balanced or unbalanced at 1% THD+N |
| Maximum level (600 ohm) | >+5.30 dBu, balanced or unbalanced at 1% THD+N |
| Crest factor (pink noise) | 3.06 (9.73 dB) |
| Crest factor (white noise) | 1.73 (4.75 dB) |
| NOTE | 0 dBu = 0.775 V, 0 dBV = 1 V, 0 dBV ≈ 2 dBu. |
|
|
| General |
|---|
| Power | Supplied by internal batteries or an external power supply |
| External Power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements | 12 VDC, 1 A |
| Batteries | |
| VTG 300 | |
| Number/type | 4 AA batteries (1.5 V alkaline or 1.2 V rechargeable) |
| Operating time (h:mm) | Alkaline batteries: 1:10 to 2:45, continuous use
Rechargeable NiMH batteries: 1:20 to 3:10, continuous use |
| VTG 300R | |
| Number/type | 1 rechargeable battery pack (4.8 V NiMH, 4000 mAh) |
| Operating time (h:mm) | 5:10 (continuous use) |
| Recharging time | 8 hours |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Mounting | No |
| Enclosure type | Metal |
| Enclosure dimensions | 6.9" H x 3.4" W x 1.5" D
(17.5 cm H x 8.6 cm W x 3.8 cm D)
(Excluding the rubber boot, connectors, and handles.)
8.3" H x 3.9" W x 2.1" D
(21.0 cm H x 9.9 cm W x 5.4 cm D)
(Including the rubber boot, connectors, and handles.) |
| Product weight | 1.2 lbs (0.5 kg) |
| Shipping weight | 4 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | VTG 300 only: CUL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | |
| Product | 3 years parts and labor, excluding the VTG 300R's rechargeable battery pack |
| VTG 300R battery pack | 90 days |
| NOTE | All nominal levels are at ±10% |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-100710-D18) |