| WAP 100AC |
|
|
| Communication — Wireless |
|---|
| Standards | IEEE 802.11b/g/n on 2.4 GHz
IEEE 802.11a/n/ac on 5 GHz, AC wave 1 |
| Security | 64/128/152-bit WEP
WPA PSK
WPA2 PSK
WPA Enterprise
WPA2 Enterprise |
| Antennae | Four internal omni-directional antennae
5 dBi on 2.4 GHz and 5.0 GHz |
| Operating frequency | Dual-Radio Concurrent 2.4 GHz and 5.0 GHz |
| Frequency radio | |
| 2.4 GHz | 2400MHz ~ 2835MHz |
| 5.0 GHz | 5180 MHz ~ 5240 MHz, 5260 MHz ~ 5320 MHz, 5500 MHz ~ 5700 MHz,
5745 MHz ~ 5825 MHz |
| Transmit power | Up to 26 dBi on 2.4 and 5 GHz
Max transmit power is limited by regulatory power |
| Radio chains: Spatial streams | 2x2:2 |
| Supported data rates | |
| 2.4 GHz | Max 300 Mbps |
| 5.0 GHz | Max 867 Mbps |
| Management | |
| Multiple SSID | Supports up to 8 SSIDs per radio |
| QoS | Compliant with IEEE 802.11e Standard
WMM |
| SNMP | v1, v2c, v3 |
| MIB | MIB I/II, Private MIB |
| VLAN | VLAN tag/VLAN pass-through |
| Program control | Web Interface (HTTP) |
|
| Communication — Ethernet Interface |
|---|
| Ethernet port | 1 female RJ-45 connector |
| Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect |
| Ethernet default settings | IP address = 192.168.1.1
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
DHCP = Off
DNS = 0.0.0.0 |
|
| General |
|---|
| Physical interface | Reset button
Kensington lock
LED indicators: Power, LAN, 2.4 GHz, 5.0 GHz, WPS |
| Memory capacity | |
| Memory | 128 MB |
| Flash memory | 16 MB |
| Power supply | Not provided |
| Power input requirements | Power over Ethernet (IEEE 802.3at compliant)
or 12 VDC, 2.0 A max |
| Power consumption | 15.77 watts |
| Ambient temperature/humidity | Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on rear and sides |
| Thermal dissipation | 53.82 BTU/hr |
| Mounting |
| Wall mount | Yes with ceiling and wall mount screw kit |
| Ceiling mount | Yes with ceiling and wall mount screw kit or T-rail mounting kit |
| Enclosure type | Plastic |
| |  |
| Enclosure dimensions | 1.64" H x 6.36" W x 6.36" D
(4.17 cm H* x 16.15 cm W x 16.15 cm D) |
| Product weight | 0.62 lb (0.28 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, FCC Class B, ICES |
| Environmental | Complies with the appropriate requirements of RoHS and WEEE |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.1-022117-D2) |