RGB-HDMI 300 A

RGB-HDMI 300 A

1. Provide a video scaler that shall support one input and one output for processing and converting HDTV and RGB video sources to HDMI.
   1. Rack-mountable scaler for HDTV and RGB video sources and associated audio
      1. Video Input Requirements
         1. Provide video input connection
            1. One 15-pin HD, configurable for RGB or component video
         2. Provide automatic detection of input video parameters
            1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
            2. The user may selectively enable or disable automatic detection for the input
         3. Provide automatic detection of analog input formats
            1. Automatically recognize RGBHV or component video signals without user action
            2. Automatically apply appropriate processing parameters including video decoding and color space setting
         4. Provide image adjustments for brightness, contrast, detail, H/V positioning, sizing, and zoom
         5. Provide storage and recall of video parameters and picture settings
            1. Automatic memories for each video input
               1. Save video settings and picture adjustments without user intervention
               2. Automatically recall settings when the same video rate is encountered
               3. The user may selectively enable or disable automatic memories
            2. Manual user presets
               1. Save picture adjustments
               2. User presets may be saved and recalled using front panel controls
               3. User presets may be saved and recalled electronically via RS-232
            3. Manual input presets
               1. Save video settings and picture adjustments
               2. Input presets may be saved and recalled electronically via RS-232
      2. Video Output Requirements
         1. Provide video output connection
            1. One HDMI
         2. Provide a range of selectable video output rates up to 1920x1200, including HDTV 1080p/60 and 2048x1080p/60
         3. Provide aspect ratio control
            1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
            2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
         4. Provide internal test patterns for calibration and setup
         5. Support automatic muting of video and sync output when no video input signal is present
            1. Provide a choice of a blue screen or a black screen before disabling sync
            2. Provide a configurable timeout period before disabling sync
            3. The user may selectively enable or disable automatic muting of sync output
         6. Support selection of output color space as RGB or component video
      3. EDID Requirements
         1. Support assignment of a user-selected EDID resolution and refresh rate for the incoming video signal
      4. Audio Requirements
         1. Provide audio input connection
            1. One 3.5 mm stereo mini jack, unbalanced analog stereo
         2. Provide audio output connection
            1. One HDMI, embedded
         3. Support embedding of the analog audio input signal onto the HDMI output
         4. Provide a delay in the audio output to match the corresponding video processing delay
         5. Provide gain and attenuation adjustments for analog input audio
      5. Control Requirements
         1. Provide control connections
            1. 3-pole captive screw: RS-232
            2. 2.5 mm mini stereo jack: RS-232
         2. Provide alternatives for configuration and operation
            1. On-screen menus navigated using front panel controls
            2. Software control program connected via RS-232
            3. Serial commands sent over RS-232
         3. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
      6. General Requirements
         1. Enclosure shall be rack-mountable, half rack width, and 1" (2.5 cm) in height
         2. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
         3. Shall meet regulatory compliances
            1. Shall meet safety compliances under CE, c-UL, and UL
            2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
            3. Shall comply with appropriate requirements of RoHS and WEEE
         4. Shall provide three year parts and labor warranty
   2. Approved device shall be the Extron RGB-HDMI 300 A (part number 60-1074-01); no alternates or equals