Accueil - Produits
USB pour AV Pro
Extendeurs USB
Passerelles AV vers USB Grilles de commutation USB Sélecteurs USB Hubs USB Modules de connectivité audiovisuelle USB Câbles et adaptateurs USB Produits d'alimentation USB Produits USB-C
Gamme USB Extender Plus
FOX USB Extender Plus Gamme UCS 900 Gamme USB Extender Plus

Imprimer

Pro

Gamme USB Extender Plus

Extendeur paires torsadées pour périphériques USB

Caractéristiques principales

Extension de périphériques USB jusqu'à 600 m (1 980') via un réseau Ethernet Gigabit
Extension de périphériques USB jusqu'à 100 m (330') point à point sur un câble CATx
Support d'appareils USB 2.0 à 1.0 avec des débits de données jusqu'à 480 Mb/s. Compatible avec des appareils USB 3.0 pouvant fonctionner à des débits de données USB 2.0
Le récepteur dispose d'un hub à quatre ports intégré offrant 5 V, 500 mA sur chaque port
Émulation périphérique
Montage en rack ou formats architecturaux
Toutes les caractéristiques

USB Extender Plus T and USB Extender Plus R

Previous Next

Galerie d'images

Aperçu interactif

AutoDesk Revit

Vidéos à la une

Descriptions pour appel d'offres

Études de cas

Remarque : la gamme USB Extender Plus n'est pas compatible avec les produits de la gamme USB Extender.

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

La gamme USB Extender Plus étend et commute les signaux USB de périphériques vers un ordinateur hôte jusqu'à 600 m (1 980') de distance, via un réseau Ethernet Gigabit, ou jusqu'à 100 m (330') point à point, à l'aide d'un câble CATx. Elle supporte des appareils USB 2.0 à 1.0 avec des débits de données de 480 Mb/s, et est compatible avec des appareils USB 3.0 pouvant fonctionner à des débits de données USB 2.0. L'émetteur dispose d'une fonction d'émulation périphérique USB pour permettre une initialisation optimale d'un ordinateur hôte qui n'est pas connecté à un clavier ou à une souris. Le récepteur inclut un hub actif intégré à quatre ports. Le contrôleur dispose de fonctionnalités simples de configuration et de contrôle permettant de créer un système de commutation USB distribué, sur un réseau Ethernet. La gamme USB Extender Plus supporte des périphériques USB tels que des claviers, des souris, des appareils de stockage de masse, et des webcams, dans des environnements audiovisuels professionnels.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

Gamme USB Extender Plus

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

USB Extender Plus T

Propose un émetteur pour transmettre les signaux depuis des appareils périphériques USB tels que les appareils d'interfaces humains, des appareils d'imagerie, des appareils de stockage de masse et d'autres appareils USB via un seul câble CATx
1. Émetteur paires torsadées pour périphériques USB
  1. Doit être associé avec un récepteur pour permettre l'extension d'appareils USB périphériques jusqu'à 100 mètres (330 pieds) depuis l'appareil hôte de l'un des câbles paires torsadées CATx
  2. Doit supporter les hôtes USB 3.0, 2.0, 1.1 ou 1.0
  3. Doit accepter les taux de transfert de données jusqu'à 480 Mb/s
  4. Doit fournir une connexion pour l'ordinateur hôte sur un connecteur USB de type B situé sur le panneau arrière
    1. Doit fournir une émulation périphérique pour connecter virtuellement un clavier et une souris à l'ordinateur hôte
    2. Ordinateur hôte.
    3. Doit offrir la possibilité de configurer l'unité avec émulation périphérique désactivée
  5. Doit fournir une connexion pour câbles paires torsadées sur un connecteur RJ‑45 situé sur le panneau arrière
  6. Doit fournir une connexion pour la configuration RS‑232 de l'émetteur sur un connecteur 2,5 mm pointe, bague, corps, situé sur le panneau avant
  7. Doit fournir un bouton de réinitialisation sur le panneau avant pour associer un émetteur à un récepteur
  8. Doit fournir une connexion pour l'alimentation 12 Vcc sur un connecteur à vis captives 3,5 mm à 2 pôles, situé sur le panneau arrière
  9. Doit être équipé avec une source d'alimentation secteur universelle externe capable de supporter une alimentation de 100 - 240 VAC, 50/60 Hz
2. Exigences générales
  1. Doit avoir un boîtier en métal discret de 2,5 cm (1") de hauteur et d'un quart de rack de largeur
  2. Doit être monté dans un rack avec des plateaux de rack en option ou des supports de montage en rack
  3. Doit pouvoir être monté de façon murale ou en meuble avec les kits de montage en option
  4. Doit permettre des indicateurs LED situés sur le panneau avant pour l'alimentation, l'état des liens et l'état de l'hôte
  5. Respect des conformités réglementaires
    1. CE, c-UL, UL
    2. CE, C-tick, FCC classe A, ICES, VCCI
    3. RoHS, WEEE
  6. Doit offrir une garantie d'au moins trois ans pour les pièces et la main d'oeuvre
3. L'appareil approuvé doit être le USB Extender Plus T (60-1471-12) ; aucune alternative, aucun équivalent

USB Extender Plus T

Propose un émetteur pour transmettre les signaux depuis des appareils périphériques USB tels que les appareils d'interfaces humains, des appareils d'imagerie, des appareils de stockage de masse et d'autres appareils USB via un seul câble CATx
1. Émetteur paires torsadées pour périphériques USB
  1. Doit être associé avec un récepteur pour permettre l'extension d'appareils USB périphériques jusqu'à 100 mètres (330 pieds) depuis l'appareil hôte de l'un des câbles paires torsadées CATx
  2. Doit supporter les hôtes USB 3.0, 2.0, 1.1 ou 1.0
  3. Doit accepter les taux de transfert de données jusqu'à 480 Mb/s
  4. Doit fournir une connexion pour l'ordinateur hôte sur un connecteur USB de type B situé sur le panneau arrière
    1. Doit fournir une émulation périphérique pour connecter virtuellement un clavier et une souris à l'ordinateur hôte
    2. Ordinateur hôte.
    3. Doit offrir la possibilité de configurer l'unité avec émulation périphérique désactivée
  5. Doit fournir une connexion pour câbles paires torsadées sur un connecteur RJ‑45 situé sur le panneau arrière
  6. Doit fournir une connexion pour la configuration RS‑232 de l'émetteur sur un connecteur 2,5 mm pointe, bague, corps, situé sur le panneau avant
  7. Doit fournir un bouton de réinitialisation sur le panneau avant pour associer un émetteur à un récepteur
  8. Doit fournir une connexion pour l'alimentation 12 Vcc sur un connecteur à vis captives 3,5 mm à 2 pôles, situé sur le panneau arrière
  9. Doit être équipé avec une source d'alimentation secteur universelle externe capable de supporter une alimentation de 100 - 240 VAC, 50/60 Hz
2. Exigences générales
  1. Doit avoir un boîtier en métal discret de 2,5 cm (1") de hauteur et d'un quart de rack de largeur
  2. Doit être monté dans un rack avec des plateaux de rack en option ou des supports de montage en rack
  3. Doit pouvoir être monté de façon murale ou en meuble avec les kits de montage en option
  4. Doit permettre des indicateurs LED situés sur le panneau avant pour l'alimentation, l'état des liens et l'état de l'hôte
  5. Respect des conformités réglementaires
    1. CE, c-UL, UL
    2. CE, C-tick, FCC classe A, ICES, VCCI
    3. RoHS, WEEE
  6. Doit offrir une garantie d'au moins trois ans pour les pièces et la main d'oeuvre
3. L'appareil approuvé doit être le USB Extender Plus T (60-1471-12) ; aucune alternative, aucun équivalent

USB Extender Plus R

Propose un récepteur pour transmettre les signaux depuis des appareils périphériques USB tels que les appareils d'interfaces humains, des appareils d'imagerie, des appareils de stockage de masse et d'autres appareils USB via un seul câble CATx
1. Récepteur paires torsadées pour périphériques USB
  1. Doit être associé avec un émetteur pour permettre l'extension d'appareils USB périphériques jusqu'à 100 mètres (330 pieds) depuis l'appareil hôte de l'un des câbles paires torsadées CATx
  2. Doit supporter les périphériques USB 3.0, 2.0, 1.1 ou 1.0
  3. Doit accepter les taux de transfert de données jusqu'à 480 Mb/s
  4. Doit fournir quatre ports USB de type A situés sur le panneau arrière pour la connexion simultanée pour jusqu'à quatre appareils périphériques
    1. Chaque port USB doit fournir 5 Vcc, 500 mA d'alimentation
  5. Doit fournir une connexion pour câbles paires torsadées sur un connecteur RJ‑45 situé sur le panneau arrière
  6. Doit fournir une connexion pour la configuration RS‑232 du récepteur sur un connecteur 2,5 mm pointe, bague, corps, situé sur le panneau avant
  7. Doit fournir un bouton de réinitialisation sur le panneau avant pour associer un émetteur à un récepteur
  8. Doit fournir une connexion pour l'alimentation 12 Vcc sur un connecteur à vis captives 3,5 mm à 2 pôles, situé sur le panneau arrière
  9. Doit être équipé avec une source d'alimentation secteur universelle externe capable de supporter une alimentation de 100 - 240 VAC, 50/60 Hz
2. Exigences générales
  1. Doit disposer d'un boîtier en métal discret de 2,5 cm (1") de hauteur et d'un quart de rack de largeur
  2. Doit être monté dans un rack avec des plateaux de rack en option ou des supports de montage en rack
  3. Doit pouvoir être monté de façon murale ou en meuble avec les kits de montage en option
  4. Doit fournir des indicateurs LED situés sur le panneau arrière pour l'alimentation , l'état des liaisons, l'état de l'hôte et l'activité des ports entre un hôte actif et chaque périphérique connecté
  5. Respect des conformités réglementaires
    1. CE, c-UL, UL
    2. CE, C-tick, FCC classe A, ICES, VCCI
    3. RoHS, WEEE
  6. Doit offrir une garantie d'au moins trois ans pour les pièces et la main d'oeuvre
3. L'appareil approuvé doit être le USB Extender Plus R (60-1471-13) ; aucune alternative, aucun équivalent

USB Extender Plus R

Propose un récepteur pour transmettre les signaux depuis des appareils périphériques USB tels que les appareils d'interfaces humains, des appareils d'imagerie, des appareils de stockage de masse et d'autres appareils USB via un seul câble CATx
1. Récepteur paires torsadées pour périphériques USB
  1. Doit être associé avec un émetteur pour permettre l'extension d'appareils USB périphériques jusqu'à 100 mètres (330 pieds) depuis l'appareil hôte de l'un des câbles paires torsadées CATx
  2. Doit supporter les périphériques USB 3.0, 2.0, 1.1 ou 1.0
  3. Doit accepter les taux de transfert de données jusqu'à 480 Mb/s
  4. Doit fournir quatre ports USB de type A situés sur le panneau arrière pour la connexion simultanée pour jusqu'à quatre appareils périphériques
    1. Chaque port USB doit fournir 5 Vcc, 500 mA d'alimentation
  5. Doit fournir une connexion pour câbles paires torsadées sur un connecteur RJ‑45 situé sur le panneau arrière
  6. Doit fournir une connexion pour la configuration RS‑232 du récepteur sur un connecteur 2,5 mm pointe, bague, corps, situé sur le panneau avant
  7. Doit fournir un bouton de réinitialisation sur le panneau avant pour associer un émetteur à un récepteur
  8. Doit fournir une connexion pour l'alimentation 12 Vcc sur un connecteur à vis captives 3,5 mm à 2 pôles, situé sur le panneau arrière
  9. Doit être équipé avec une source d'alimentation secteur universelle externe capable de supporter une alimentation de 100 - 240 VAC, 50/60 Hz
2. Exigences générales
  1. Doit disposer d'un boîtier en métal discret de 2,5 cm (1") de hauteur et d'un quart de rack de largeur
  2. Doit être monté dans un rack avec des plateaux de rack en option ou des supports de montage en rack
  3. Doit pouvoir être monté de façon murale ou en meuble avec les kits de montage en option
  4. Doit fournir des indicateurs LED situés sur le panneau arrière pour l'alimentation , l'état des liaisons, l'état de l'hôte et l'activité des ports entre un hôte actif et chaque périphérique connecté
  5. Respect des conformités réglementaires
    1. CE, c-UL, UL
    2. CE, C-tick, FCC classe A, ICES, VCCI
    3. RoHS, WEEE
  6. Doit offrir une garantie d'au moins trois ans pour les pièces et la main d'oeuvre
3. L'appareil approuvé doit être le USB Extender Plus R (60-1471-13) ; aucune alternative, aucun équivalent

USB Extender Plus D T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the transmitter on one 2.5 mm tip, ring, sleeve connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus D T (60-1473-13); no alternates or equals

USB Extender Plus D T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the transmitter on one 2.5 mm tip, ring, sleeve connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus D T (60-1473-13); no alternates or equals

USB Extender Plus D R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the receiver on one 2.5 mm tip, ring, sleeve connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus D R (60-1473-23); no alternates or equals

USB Extender Plus D R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the receiver on one 2.5 mm tip, ring, sleeve connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus D R (60-1473-23); no alternates or equals

USB Extender Plus AAP R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the receiver on one 2.5 mm tip, ring, sleeve connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a furniture or floor box-mountable enclosure
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus AAP R (60-1472-22 or 60-1472-23); no alternates or equals

USB Extender Plus AAP R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the receiver on one 2.5 mm tip, ring, sleeve connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a furniture or floor box-mountable enclosure
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus AAP R (60-1472-22 or 60-1472-23); no alternates or equals

USB Extender Plus T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the transmitter on one 2.5 mm tip, ring, sleeve connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf or rack mounting brackets
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus T HID (60-1539-12); no alternates or equals

USB Extender Plus T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the transmitter on one 2.5 mm tip, ring, sleeve connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf or rack mounting brackets
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus T HID (60-1539-12); no alternates or equals

USB Extender Plus R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the receiver on one 2.5 mm tip, ring, sleeve connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf or rack mounting brackets
  2. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Rack mountable with optional rack shelf or rack mounting brackets
    2. Wall or furniture mountable with optional mounting kits
  3. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1539-13); no alternates or equals

USB Extender Plus R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to 480 Mbps
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for RS-232 configuration of the receiver on one 2.5 mm tip, ring, sleeve connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf or rack mounting brackets
  2. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Rack mountable with optional rack shelf or rack mounting brackets
    2. Wall or furniture mountable with optional mounting kits
  3. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1539-13); no alternates or equals

USB Plus Matrix Controller

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender Plus Series transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width metal enclosure
    1. Compact, low profile enclosure allows discreet installation
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Plus Matrix Controller (42-267-01); no alternates or equals

USB Plus Matrix Controller

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender Plus Series transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width metal enclosure
    1. Compact, low profile enclosure allows discreet installation
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Plus Matrix Controller (42-267-01); no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

Gamme USB Extender Plus -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.