Accueil - Produits
Contrôle et automatisation
Contrôleurs d'automatisation pour espaces de travail
Applications Mises à niveau LinkLicense pour systèmes de contrôle Drivers d'appareils Produits eBUS Firmware GlobalViewer Enterprise Processeurs de contrôle IP Link Pro xi Télécommandes IR et claviers de commande Contrôleurs MediaLink Plus Claviers de commande réseau Logiciels TouchLink Pro-Touchpanels Utilitaires Contrôle virtuel
WC Pro 150 OCS
HD CTL 100 WC Pro 150 OCS WC Pro 160

Twitter Copier le lien

Imprimer

Pro

WC Pro 150 OCS

Contrôleur d'automatisation pour espace de travail avec détecteur de présence

Caractéristiques principales

Fonctionnement immédiat qui supporte un contrôle de l'écran via CEC depuis un port HDMI
Page Web embarquée qui permet une configuration simple des détecteurs et fournit une méthode de contrôle Ethernet, RS‑232, ou IR de la mise en marche/arrêt de l'écran
Double technologie de détection de présence
La LinkLicense pour processeur de contrôle WC Pro offre plusieurs améliorations
Un port série RS‑232 bidirectionnel
Toutes les caractéristiques

WC Pro 150 OCS in a small conference room

Previous Next

Galerie d'images

Aperçu interactif

Aide pour produits

Descriptions pour appel d'offres

Activer une LinkLicense

Didacticiels

Générer une clé d'accès universelle

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Le WC Pro 150 OCS Extron est un contrôleur d'automatisation compact pour espace de travail et équipé en Ethernet. Il dispose d'un détecteur de présence intégré qui allume automatiquement un écran lorsqu'un utilisateur entre dans une salle et l'éteint lorsque aucun mouvement n'est détecté. Il est conçu pour un fonctionnement immédiat avec le CEC pour un contrôle automatisé des écrans dans des espaces de travail de toutes tailles. Si une personnalisation supplémentaire est requise, la page Web embarquée permet de configurer les détecteurs et de contrôler un seul écran via Ethernet, RS‑232, IR, ou CEC. Ces ports sont tous situés sur l'interface d'expansion de ports raccordée, ce qui permet de bien les dissimuler derrière un écran. Mesurant uniquement 15 cm (6") de long, le WC Pro 150 OCS offre une conception compacte et moderne, et peut être installé en dessous ou au‑dessus d'un écran plat.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

WC Pro 150 OCS

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

WC Pro 150 OCS

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a female HDMI output located on the back of the automation device that supports CEC control of the connected display if supported
  2. Device shall include acoustic and passive infrared sensors that provide a wide coverage area for occupant detection
  3. Device shall include an integrated port expansion interface that contains the following ports:
    1. A female RJ-45 jack that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
    2. A configurable RS-232 port on captive screw connectors that can be configured for unidirectional or bidirectional control of AV system components
    3. An IR port on captive screw connector for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter
    4. Two digital I/O’s on a captive screw connector located on the back of the controller and can be used to interface with devices such as sensors, switches, LEDs, and relays
  4. Provide rear panel LED activity indicators for power status
  5. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  6. Device shall have at least 8 GB of nonvolatile memory
  7. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  8. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  9. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall have the ability to be mounted above or below a display and shall be able to be secured using the included brackets and hardware.
  2. Device shall feature a ¼”-20 universal female thread connection for mounting
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in web page or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software.
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health
  7. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services.
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 150 OCS part number 60-1803-01; no alternates or equals

WC Pro 150 OCS

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a female HDMI output located on the back of the automation device that supports CEC control of the connected display if supported
  2. Device shall include acoustic and passive infrared sensors that provide a wide coverage area for occupant detection
  3. Device shall include an integrated port expansion interface that contains the following ports:
    1. A female RJ-45 jack that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
    2. A configurable RS-232 port on captive screw connectors that can be configured for unidirectional or bidirectional control of AV system components
    3. An IR port on captive screw connector for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter
    4. Two digital I/O’s on a captive screw connector located on the back of the controller and can be used to interface with devices such as sensors, switches, LEDs, and relays
  4. Provide rear panel LED activity indicators for power status
  5. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  6. Device shall have at least 8 GB of nonvolatile memory
  7. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  8. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  9. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall have the ability to be mounted above or below a display and shall be able to be secured using the included brackets and hardware.
  2. Device shall feature a ¼”-20 universal female thread connection for mounting
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in web page or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software.
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health
  7. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services.
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 150 OCS part number 60-1803-01; no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

WC Pro 150 OCS -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Partager cet élément par e-mail

WC Pro 150 OCS

Contrôleur d'automatisation pour espace de travail avec détecteur de présence

Envoyé à: *

Veuillez entrer une adresse électronique valide.

Message:

( caractère(s) restant(s))

Envoyez-moi une copie

Merci. Votre e-mail a été envoyé.

Une erreur est survenue lors de l'envoi de votre e-mail. Veuillez réessayer ultérieurement.