Accueil - Produits
Amplificateurs de puissance
Amplificateurs de puissance
Amplificateurs de puissance réseau
XPA 2004
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 1004C XPA U 2002 SB XPA U 2004 FX XPA U 2008 FX XPA U 3502 XPA U 358 XPA U 358C XPA U 758

Imprimer

Pro

XPA 2004

Amplificateur à quatre canaux - 200 W par canal

Caractéristiques principales

Puissance de sortie 800 W rms :
4 x 200 W @ 4 Ω ; 4 x 100 W @ 8 Ω ; 2 x 400 W @ 8 Ω (bridgé)
Amplificateur certifié ENERGY STAR®
Rapport signal/bruit professionnel et performances THD+B
Technologie brevetée CDRS™ - Class D Ripple Suppression Extron
Refroidi par convection, pas de ventilateur
Courant d'appel très faible, séquençage de l'alimentation non requis
Toutes les caractéristiques

Galerie d'images

Aperçu interactif

Comparer des caractéristiques

Calculateurs audio

Outil de sélection d'amplificateurs

Avec ce nouvel outil, vous pouvez désormais rechercher des modèles d'amplificateurs par caractéristique

Descriptions pour appel d'offres

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Le XPA 2004 de la gamme XTRA™ est un amplificateur de puissance 1U, refroidi par convection, qui dispose de quatre canaux de 200 W sous 4 Ω ou de 100 W sous 8 Ω. Cet amplificateur professionnel présente un rapport signal/bruit de 100 dB avec un THD+B (distorsion harmonique totale + bruit) à 0,1%. Le XPA 2004 est un amplificateur certifié ENERGY STAR® doté d'un design de classe D très performant et exclusif Extron. Il dispose également de la technologie brevetée CDRS™ - Class D Ripple Suppression qui offre une onde audio lisse et améliore la fidélité du signal, par rapport aux amplificateurs de classe D traditionnels. Le XPA 2004 est deux fois plus petit que des amplificateurs équivalents, prend peu d'espace en rack, et ne pèse que 4 kg (9 lb). Le design exclusif Extron, très performant, génère très peu de chaleur et permet à l'amplificateur d'être refroidi par convection.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

XPA 2004

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

XPA 2004

Provide a compact, energy efficient audio amplifier that shall support four analog inputs and four amplified outputs with 100 or 200 watts rms power output per channel.
1. Compact amplifier with four channels of 100 or 200 watts rms power output and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 3-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to either input 1 or input 3 for bridged output operation
  2. Output Requirements
    1. Shall support four speaker level signals on two 4-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide a total of 800 watts rms output power with 200 watts rms per channel into 4 ohms, or 100 watts rms per channel into 8 ohms measured at 1 kHz with less than 0.05% THD
    3. Shall support bridging of either pair of outputs to provide 400 watts rms output power into 8 ohms measured at 1 kHz with less than 0.05% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall support a minimum load impedance of 4 ohms under normal operation or 8 ohms during bridged operation
    6. Shall provide a THD+N measurement of 0.1% measured from 20 Hz to 20 kHz, at 1 kHz and 3 dB below clipping
    7. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 146.5 watts during typical (1/8 power) operation with four output channels driven with 4 ohm loads
    2. Shall draw 89.3 watts during typical (1/8 power) operation with four output channels driven with 8 ohm loads
    3. Shall draw 28.7 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on four 3-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide two switches for selecting bridged operation of either pair of outputs
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, PSE, S-Mark, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR Class B, CISPR 24, C-tick, ED55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three years parts and labor warranty
2. Approved device shall be the Extron XPA 2004, part number 60-563-02; no alternates or equals.

XPA 2004

Provide a compact, energy efficient audio amplifier that shall support four analog inputs and four amplified outputs with 100 or 200 watts rms power output per channel.
1. Compact amplifier with four channels of 100 or 200 watts rms power output and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 3-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to either input 1 or input 3 for bridged output operation
  2. Output Requirements
    1. Shall support four speaker level signals on two 4-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide a total of 800 watts rms output power with 200 watts rms per channel into 4 ohms, or 100 watts rms per channel into 8 ohms measured at 1 kHz with less than 0.05% THD
    3. Shall support bridging of either pair of outputs to provide 400 watts rms output power into 8 ohms measured at 1 kHz with less than 0.05% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall support a minimum load impedance of 4 ohms under normal operation or 8 ohms during bridged operation
    6. Shall provide a THD+N measurement of 0.1% measured from 20 Hz to 20 kHz, at 1 kHz and 3 dB below clipping
    7. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 146.5 watts during typical (1/8 power) operation with four output channels driven with 4 ohm loads
    2. Shall draw 89.3 watts during typical (1/8 power) operation with four output channels driven with 8 ohm loads
    3. Shall draw 28.7 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on four 3-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide two switches for selecting bridged operation of either pair of outputs
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, PSE, S-Mark, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR Class B, CISPR 24, C-tick, ED55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three years parts and labor warranty
2. Approved device shall be the Extron XPA 2004, part number 60-563-02; no alternates or equals.

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

XPA 2004 -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.