Accueil - Produits
Câbles et adaptateurs
Câbles paires torsadées numériques
Câbles de contrôle et audiovisuels Câbles certifiés HSA et Cable Cubby Câbles fibre optique Câbles et adaptateurs USB Câbles BNC / BNC Mini haute résolution Câbles VGA / VGA Câbles VGA Câbles VGA avec audio Câbles VGA Micro HR Câbles VGA Micro HR avec audio Câbles vidéo et audio Câbles audio Câbles VGA / BNC (SY VGA) Câbles SY VGA mâle/5 BNC femelles Câbles SY VGA mâle/5 BNC mâles Câbles SY VGA femelle/5 BNC femelles Câbles contrôle et communication Câbles RS-232 Câbles et adaptateurs de contrôle Câbles spéciaux Câbles de configuration Adaptateurs audio, vidéo, et de contrôle Adaptateurs audio Adaptateurs S-Video Adaptateurs VGA Changeurs de genre Adaptateurs DisplayPort, DVI, et HDMI Adaptateurs USB Câbles et adaptateurs DisplayPort Câbles et adaptateurs HDMI Câbles et adaptateurs DVI Câbles analogiques haute résolution
Gamme XTP DTP 22
Gamme XTP DTP 22 Gamme XTP DTP 22P Gamme XTP DTP 24 Gamme XTP DTP 24P

Twitter Copier le lien

Imprimer

Pro

Gamme XTP DTP 22

Câbles paires torsadées blindées avec une finition de précision pour XTP Systems et DTP Systems

Caractéristiques principales

Fournit des signaux vidéo 4K/60 non compressés DTP3 à 4:4:4 à des distances pouvant atteindre 100 m (330')
Conçus pour de meilleures performances avec les XTP Systems^® et les DTP^® Systems
Offrent une meilleure protection contre les interférences extérieures et assure une transmission des signaux de grande qualité
Conçus pour assurer l'intégrité des signaux HDMI 2.0b non compressés
Design S/FTP avec quatre conducteurs paires torsadées blindées à l'intérieur d'un blindage en tresse
Structure en cuivre 22 AWG
Toutes les caractéristiques

Galerie d'images

Descriptions pour appel d'offres

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Les câbles de la gamme XTP DTP 22 Extron sont composés de paires torsadées blindées et d'une finition de précision qui optimisent la transmission de signaux haut débit dans des XTP Systems^® et DTP^® Systems Extron. Les câbles sont assemblés en usine avec des fiches RJ‑45 XTP DTP 22 et des manchons moulés. Conçus pour s'adapter aux capacités de performance améliorées de la technologie DTP3, les câbles incluent une bobine XTP DTP 22 Extron, assurant l'intégrité du signal pour la vidéo 4K/60 non compressée à 4:4:4 sur des distances inférieures ou égales à 100 m (330').

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

Gamme XTP DTP 22

Gamme VN‑Matrix 225

Gamme XTP DTP 22

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

XTP DTP 22/3

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/3, part number 26-739-03; no alternates or equals

XTP DTP 22/3

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/3, part number 26-739-03; no alternates or equals

XTP DTP 22/6

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/6, part number 26-739-06; no alternates or equals

XTP DTP 22/6

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/6, part number 26-739-06; no alternates or equals

XTP DTP 22/9

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/9, part number 26-739-09; no alternates or equals

XTP DTP 22/9

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/9, part number 26-739-09; no alternates or equals

XTP DTP 22/12

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/12, part number 26-739-12; no alternates or equals

XTP DTP 22/12

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/12, part number 26-739-12; no alternates or equals

XTP DTP 22/25

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/25, part number 26-739-25; no alternates or equals

XTP DTP 22/25

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/25, part number 26-739-25; no alternates or equals

XTP DTP 22/35

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/35, part number 26-739-35; no alternates or equals

XTP DTP 22/35

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/35, part number 26-739-35; no alternates or equals

XTP DTP 22/50

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/50, part number 26-739-50; no alternates or equals

XTP DTP 22/50

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/50, part number 26-739-50; no alternates or equals

XTP DTP 22/75

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/75, part number 26-739-75; no alternates or equals

XTP DTP 22/75

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/75, part number 26-739-75; no alternates or equals

XTP DTP 22/100

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/100, part number 26-739-100; no alternates or equals

XTP DTP 22/100

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/100, part number 26-739-100; no alternates or equals

XTP DTP 22/125

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/125, part number 26-739-125; no alternates or equals

XTP DTP 22/125

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/125, part number 26-739-125; no alternates or equals

XTP DTP 22/150

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/150, part number 26-739-150; no alternates or equals

XTP DTP 22/150

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/150, part number 26-739-150; no alternates or equals

XTP DTP 22/175

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/175, part number 26-739-175; no alternates or equals

XTP DTP 22/175

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/175, part number 26-739-175; no alternates or equals

XTP DTP 22/200

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/200, part number 26-739-200; no alternates or equals

XTP DTP 22/200

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/200, part number 26-739-200; no alternates or equals

XTP DTP 22/300

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/300, part number 26-739-300; no alternates or equals

XTP DTP 22/300

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/300, part number 26-739-300; no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

Gamme XTP DTP 22 -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Partager cet élément par e-mail

Gamme XTP DTP 22

Câbles paires torsadées blindées avec une finition de précision pour XTP Systems et DTP Systems

Envoyé à: *

Veuillez entrer une adresse électronique valide.

Message:

( caractère(s) restant(s))

Envoyez-moi une copie

Merci. Votre e-mail a été envoyé.

Une erreur est survenue lors de l'envoi de votre e-mail. Veuillez réessayer ultérieurement.