XTP T USW 103 4K

XTP T USW 103 4K

1. Provide a three-input switching twisted pair transmitter that shall support distribution of video, multi-channel audio, bidirectional RS-232 and IR control, along with Ethernet extension
   1. Switching and long distance transmission of DisplayPort, HDMI, VGA, audio, Ethernet, and bidirectional control signals over a shielded CATx twisted pair cable
   2. Video input requirements
      1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
      2. Shall provide one (1) female DisplayPort connector for digital video signals
      3. Shall provide one (1) HD-15 input for analog video signals
         1. Analog video input signals digitized prior to transmission
      4. Shall support computer and video resolutions up to 4096x2160 at 30 Hz with 4:4:4 chroma sampling
      5. Shall support RGB and YCbCr color space formats
      6. Shall support HDMI specifications of
         1. Data rates up 10.2 Gbps
         2. Deep Color up to 12-bit
         3. 3D content
         4. HD lossless audio formats
      7. Shall support DisplayPort 1.1 and a maximum data rate of 10.8 Gbps (2.7 Gbps per lane)
   3. HDCP requirements
      1. Shall be HDCP 2.3 compliant – HDMI input
      2. Shall be HDCP 1.3 compliant – DisplayPort input
      3. Shall provide authentication and maintain continuous verification of HDCP key exchange between connected devices
      4. Shall provide the option to disable HDCP processing at the HDMI and DisplayPort input connections when passing unencrypted content
      5. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
   4. EDID requirements
      1. Shall provide automatic EDID management between connected devices
      2. Maintain continuous EDID communication with the connected source
      3. User selection of EDID from any connected display
      4. User-selection of EDID from pre-stored data files
   5. Audio input requirements
      1. Shall provide one (1) female HDMI Type A connector – shared with video inputs
      2. Shall provide one (1) female DisplayPort connector – shared with video
      3. Shall provide one (1) 3.5 mm mini stereo jack for analog audio
      4. Shall support multiple embedded audio formats
      5. Shall support audio embedding of analog audio
      6. Shall enable the analog audio input to be assigned to any of the three video inputs
      7. Shall provide audio gain and attenuation adjustment capability
   6. Switching Requirements
      1. Shall provide automatic switching between input sources for unmanaged locations
         1. Shall provide buttons on front panel for user-selectable control
            1. Mode
            2. Normal
            3. Auto
         2. Automatically switch to the active input
         3. Configurable switching priority when multiple inputs are active
            1. High to low: highest numbered input has priority
            2. Low to high: lowest numbered input has priority
   7. Transmission requirements
      1. Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
      2. Shall provide signal transmission over a single, shielded CATx twisted pair cable
   8. Interconnection requirements
      1. Shall provide one (1) RJ-45 twisted pair connection
      2. Shall provide interconnection between the transmitter and an XTP Series receiver or input board over one, shielded CATx twisted pair cable
   9. Ethernet extension
      1. Shall provide one (1) 10/100 Ethernet port
         1. Ethernet pass-through port to reduce the number of independent network drops
   10. AV Device Control requirements
       1. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for control pass-through
       2. Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
   11. Control/Configuration requirements
       1. Shall provide one (1) 4-pole captive screw connector on rear panel for contact closure input switching
       2. Shall provide one (1) 4-pole captive screw connector on rear panel for tally output connections
       3. Tally output shall provide +5 VDC to light an LED indicating the currently selected input
       4. Shall provide one (1) female mini USB port B on front panel for setup and configuration
       5. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for setup and configuration
       6. Shall allow setup and configuration through a system-wide management software from an XTP CrossPoint matrix switcher communication channel
   12. Power requirements
       1. Shall support remote powering from an XTP twisted pair input board or XTP power injector
       2. Shall include an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
   13. General requirements
       1. Shall provide internal color bars test pattern for setup and calibration
       2. Shall provide visual signal on LED indicators located on front panel for auto switch selection, video signal presence by input, HDCP compliance, and audio clipping
       3. Shall provide visual signal on LED indicators on back panel for link status, signal presence, and power
       4. Shall have a 1.75” (4.3 cm) high, half rack width mountable metal enclosure
       5. Shall be rack and furniture mountable with optional mounting kits
       6. Shall provide Extron LockIt® HDMI cable lacing brackets
       7. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
       8. Shall meet regulatory compliance
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS, WEEE
       9. Shall provide at least three (3) years parts and labor warranty
       10. Shall be compatible with other devices within an XTP System for distribution and routing
   14. Approved device shall be the Extron XTP T USW 103 4K (60-1717-12); no alternates or equals