Accueil - Produits
Fibre optique
Extendeurs fibre optique
Émetteurs/sélecteurs universels Extendeurs DisplayPort Extendeurs HDMI Extendeurs DVI Extendeurs RVB et HD composante Extendeurs 3G-SDI Vidéo à définition standard Extendeurs USB Accessoires Sélecteurs fibre optique Grilles de commutation fibre optique Produits audio et de contrôle fibre optique Bobines de câble fibre optique Connecteurs et accessoires fibre optique Câbles fibre optique
FOX3 T 311
FOX II T HD 4K FOX3 R 101 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 101 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI Gamme HD Pro Plenum HFX 100 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI PowerCage FOX SR HDMI PowerCage FOX Tx HDMI

Imprimer

Nouveau Pro

FOX3 T 311

Émetteur fibre optique pour HDMI, USB HID, audio, contrôle, et synchronisation 3D

Caractéristiques principales

Transmet des signaux vidéo HDMI, USB HID, audio stéréo, de contrôle RS-232, de contrôle IR, et de synchronisation 3D sur un câble fibre optique
Supporte la vidéo 4K mathématiquement sans perte jusqu'à 4096 x 2160 à 60 Hz avec un échantillonnage 4:4:4 de la chrominance sur une fibre
Supporte la vidéo 4K non compressée jusqu'à 4096 x 2160 à 60 Hz avec un échantillonnage 4:4:4 de la chrominance sur deux fibres
Prise en charge de la spécification HDMI 2.0, notamment des débits de données jusqu'à 18 Gb/s, le Deep Color jusqu'à 12 bits, et le 3D
Conforme HDCP 2.3
Capacité de filtrage par catégorie d'appareils sur port USB HID réduisant l'éventail des types d'appareils aux appareils HID
Toutes les caractéristiques

Galerie d'images

Aperçu interactif

Vidéos à la une

Comparer des caractéristiques

Activer une LinkLicense

Descriptions pour appel d'offres

Calculateur de débits de données 8K

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

L'émetteur fibre optique FOX3 T 311 Extron assure la transmission longue distance des signaux vidéo conformes HDCP, USB HID, audio, de contrôle, et de synchronisation 3D sur un câble fibre optique. Offrant une qualité d'images haute résolution exceptionnelle, il s'appuie sur la technologie entièrement numérique Extron pour fournir une transmission non compressée au pixel près d'images jusqu'à 4K/60 à 4:4:4 sur deux fibres ou 4K/60 à 4:4:4 mathématiquement sans perte sur une fibre. Le port USB HID applique un filtrage par catégorie d'appareils pour réduire l'éventail des types d'appareils aux appareils HID. Le FOX3 T 311 est spécifiquement conçu pour les systèmes audiovisuels et KVM, et offre également de nombreuses caractéristiques qui facilitent le travail des intégrateurs comme le Key Minder^®, l'EDID Minder^®, l’embeddage audio, la supervision et le contrôle Ethernet, le gain et l'atténuation audio, et la supervision du système en temps réel.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

FOX3 T 311

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

60-1523-11 - FOX3 T 311 MM - Lossless 4K/60 Transmitter MM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over multimode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 MM (60-1523-11); no alternates or equals

60-1523-11 - FOX3 T 311 MM - Lossless 4K/60 Transmitter MM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over multimode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 MM (60-1523-11); no alternates or equals

60-1523-12 - FOX3 T 311 SM - Lossless 4K/60 Transmitter SM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over singlemode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB HID, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 SM (60-1523-12); no alternates or equals

60-1523-12 - FOX3 T 311 SM - Lossless 4K/60 Transmitter SM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over singlemode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB HID, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 SM (60-1523-12); no alternates or equals

60-1523-13 - FOX3 T 311 MM – Uncompressed 4K/60 Transmitter MM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over multimode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB HID, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 MM (60-1523-13); no alternates or equals

60-1523-13 - FOX3 T 311 MM – Uncompressed 4K/60 Transmitter MM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over multimode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB HID, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 MM (60-1523-13); no alternates or equals

60-1523-14 - FOX3 T 311 SM - Uncompressed 4K/60 Transmitter SM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over singlemode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB HID, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 SM (60-1523-14); no alternates or equals

60-1523-14 - FOX3 T 311 SM - Uncompressed 4K/60 Transmitter SM

Shall provide a fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB HID, control, and 3D sync signals over singlemode fiber optic cabling
2. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  4. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide embedding of analog stereo audio
  3. Shall provide gain and attenuation adjustment capability
5. Audio return channel output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
  2. Shall support host connection for USB HID devices and smart card readers
  3. Shall support device class filtering to limit device types to USB HID devices and smart card readers
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB HID, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, digital audio input signal presence, analog audio input signal, USB HID presence, and power
  3. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  4. Shall have a 1U high, half rack width metal enclosure
  5. Shall be rack mountable with optional rack shelf
  6. Shall be furniture mountable with optional mounting kits
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  8. Shall provide at least three years parts and labor warranty
  9. Shall be compatible with the Extron FOX3 R 311 fiber optic receiver
  10. Shall be compatible with the Extron FOX3 SR 311 fiber optic receiver
  11. Shall be compatible with Extron FOX3 Series fiber optic receivers
  12. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 SM (60-1523-14); no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

FOX3 T 311 -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.