Accueil - Produits
Enceintes
Enceintes plafond
Enceintes plafond Flat Field Enceintes suspendues Enceintes murales Options de montage d'enceinte Caissons de basses
SF 26X
CS 120P CS 1226T Plus CS 123T CS 26T Plus CS 3T SF 10C SUB SF 26CT SF 26CT LP SF 26X SF 3C LP SF 3CT LP SF 8CT SUB SGK SF26C SGK SF3C

Imprimer

Pro

SF 26X

Enceintes plafond SoundField à deux voies, 8 Ω, avec baffle arrière ouvert

Caractéristiques principales

Design sans baffle arrière ouvert de type baffle infini
Impédance nominale de 8 Ω
Boomer en polypropylène de 165 mm (6,5")
Tweeter à dôme refroidi par ferrofluide 19 mm (0,75")
Bande de fréquence : 50 Hz à 20 kHz
25 W en bruit rose continu
50 W en programme continu
Toutes les caractéristiques

Previous Next

Galerie d'images

Aperçu interactif

Vidéos à la une

Outil de sélection d'enceintes

Calculateur pour enceintes plafond

Descriptions pour appel d'offres

Études de cas

Enceintes vendues par paire

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Le SF 26X SoundField^® Extron est une enceinte plafond à deux voies composée d'un baffle arrière ouvert et d'un haut-parleur coaxial double, pour une utilisation dans des espaces non-plenum. L'ensemble du haut-parleur inclut un boomer de 165 mm (6,5") couplé à un tweeter à dôme pivotant de 19 mm (0,75"), refroidi par ferrofluide. Le SF 26X dispose d'une bande de fréquences de 50 Hz à 20 kHz permettant une reproduction précise de la voix et des détails de la musique. Cette enceinte offre une impédance nominale de 8 Ω, et est conçue avec un grand angle de couverture conique uniforme de 107° et une réponse hors axe sans couleur. Le SF 26X possède un cadre à bord fin offrant au plafond un aspect travaillé, ainsi qu'une grille à fixation magnétique.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

SF 26X

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

SF 26X

Provide a two-way open back 8 ohm ceiling speaker that shall provide wide, uniform coverage and uncolored off-axis response in non-plenum airspace environments.
1. Two-way open back ceiling speaker with a coaxial dual driver design, 8 ohm nominal impedance, and wide, uniform 110° conical dispersion
  1. Driver Requirements
    1. Shall consist of a 6.5" (16.5 cm) polypropylene cone woofer
    2. Shall consist of a 3/4" (1.9 cm) ferrofluid-cooled dome tweeter
  2. Performance Requirements
    1. Shall provide a frequency range of 50 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a power capacity of 25 watts (rms) continuous pink noise per IEC 60268-5 and 50 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 86 dB SPL (1 W, 1 m) measured in half space
    4. Shall provide a nominal impedance of 8 ohms
    5. Shall provide a cross over frequency of 4.2 kHz
    6. Shall provide a nominal conical coverage angle of 110°
  3. Electrical Requirements
    1. Shall support 8 ohm direct connection from power amplifiers
    2. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
    3. Shall support wiring multiple speakers using parallel or loop-through wiring
    4. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
    5. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
    6. Shall provide an internal overload protection circuit
  4. Enclosure Requirements
    1. Shall consist of an open back, infinite baffle design
    2. Shall have a white, paintable textured finish
    3. Shall provide a secondary, seismic tie-off point
    4. Shall provide a speaker wire strain relief tie-down point
    5. Shall provide of a thin-edged bezel surrounding the grille
    6. Shall measure 9" (22.66 cm) in diameter from bezel edge to edge
    7. Shall measure 2.95" (7.49 cm) in height from mounting surface to top of locking arm post
    8. Shall protrude 0.49" (1.24 cm) into environment from mounting surface
    9. Shall require 7.60" (19.30 cm) diameter opening in mounting surface for speaker cutout
    10. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. Mounting Requirements
    1. Shall provide four, baffle-integrated spring-loaded locking arms
    2. Shall support mounting in material up to 1.5" (3.8 cm) thick
    3. Shall support installation in soft ceiling tiles with the use of optional Extron Ceiling Mount Kit
    4. Shall be installed in non-plenum airspace environments
  6. General Requirements
    1. Shall be sold in pairs
    2. Shall include cutout template/paint shield and setup guide
    3. Shall meet regulatory compliances
      1. Shall comply with appropriate requirements of RoHS and WEEE
    4. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron SF 26X, part number 60-1312-03; no alternates or equals.

SF 26X

Provide a two-way open back 8 ohm ceiling speaker that shall provide wide, uniform coverage and uncolored off-axis response in non-plenum airspace environments.
1. Two-way open back ceiling speaker with a coaxial dual driver design, 8 ohm nominal impedance, and wide, uniform 110° conical dispersion
  1. Driver Requirements
    1. Shall consist of a 6.5" (16.5 cm) polypropylene cone woofer
    2. Shall consist of a 3/4" (1.9 cm) ferrofluid-cooled dome tweeter
  2. Performance Requirements
    1. Shall provide a frequency range of 50 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a power capacity of 25 watts (rms) continuous pink noise per IEC 60268-5 and 50 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 86 dB SPL (1 W, 1 m) measured in half space
    4. Shall provide a nominal impedance of 8 ohms
    5. Shall provide a cross over frequency of 4.2 kHz
    6. Shall provide a nominal conical coverage angle of 110°
  3. Electrical Requirements
    1. Shall support 8 ohm direct connection from power amplifiers
    2. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
    3. Shall support wiring multiple speakers using parallel or loop-through wiring
    4. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
    5. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
    6. Shall provide an internal overload protection circuit
  4. Enclosure Requirements
    1. Shall consist of an open back, infinite baffle design
    2. Shall have a white, paintable textured finish
    3. Shall provide a secondary, seismic tie-off point
    4. Shall provide a speaker wire strain relief tie-down point
    5. Shall provide of a thin-edged bezel surrounding the grille
    6. Shall measure 9" (22.66 cm) in diameter from bezel edge to edge
    7. Shall measure 2.95" (7.49 cm) in height from mounting surface to top of locking arm post
    8. Shall protrude 0.49" (1.24 cm) into environment from mounting surface
    9. Shall require 7.60" (19.30 cm) diameter opening in mounting surface for speaker cutout
    10. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. Mounting Requirements
    1. Shall provide four, baffle-integrated spring-loaded locking arms
    2. Shall support mounting in material up to 1.5" (3.8 cm) thick
    3. Shall support installation in soft ceiling tiles with the use of optional Extron Ceiling Mount Kit
    4. Shall be installed in non-plenum airspace environments
  6. General Requirements
    1. Shall be sold in pairs
    2. Shall include cutout template/paint shield and setup guide
    3. Shall meet regulatory compliances
      1. Shall comply with appropriate requirements of RoHS and WEEE
    4. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron SF 26X, part number 60-1312-03; no alternates or equals.

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

SF 26X -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.