XTP T FB 202 4K

XTP T FB 202 4K

1. Provide a two-input twisted pair transmitter designed to mount in a variety of floor boxes that shall support distribution of video, audio, control, and Ethernet
   1. Long distance transmission of HDMI, VGA, audio, Ethernet, and bidirectional control signals over a shielded CATx twisted pair cable
   2. Video input requirements
      1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
      2. Shall provide one (1) HD-15 input for analog signals
         1. Analog video input signals digitized prior to transmission
      3. Shall support computer and video resolutions up to 4096x2160 at 30 Hz with 4:4:4 chroma sampling
      4. Shall support RGB and YCbCr color space formats
      5. Shall support HDMI specifications of
         1. Data rates up 10.2 Gbps
         2. Deep Color up to 12-bit
         3. 3D content
         4. HD lossless audio formats
   3. HDCP requirements
      1. Shall be HDCP 2.3 compliant
      2. Shall provide authentication and maintain continuous verification of HDCP key exchange between connected devices
      3. Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
      4. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
   4. EDID requirements
      1. Shall provide automatic EDID management between connected devices
         1. Maintain continuous EDID communication with the connected source
         2. User selection of EDID from any connected display
         3. User-selection of EDID from pre-stored data files
   5. Audio input requirements
      1. Shall provide one (1) female HDMI Type A connector – shared with video input
      2. Shall provide one (1) female 3.5 mini stereo jack for analog audio
      3. Shall support multiple embedded audio formats
      4. Shall support audio embedding of analog audio
      5. Shall provide selectable HDMI audio pass-through
      6. Shall enable the analog audio input to be assigned to either video input
      7. Shall provide audio gain and attenuation adjustment capability
      8. Shall support audio only signal extension
   6. Switching Requirements
      1. Shall provide automatic switching between input sources for unmanaged locations
         1. Automatically switch to the active input
         2. Configurable switching priority when multiple inputs are active
            1. High to low: highest numbered input has priority
            2. Low to high: lowest numbered input has priority
   7. Transmission requirements
      1. Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
      2. Shall provide signal transmission over a single, shielded CATx twisted pair cable
   8. Interconnection requirements
      1. Shall provide one (1) RJ-45 twisted pair connection
      2. Shall provide interconnection between the transmitter and an XTP Series receiver or input board over one, shielded CATx twisted pair cable
   9. Ethernet extension
      1. Shall provide one (1) 10/100 Ethernet port
         1. Ethernet pass-through port to reduce the number of independent network drops
   10. AV Device Control requirements
       1. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for control pass-through
       2. Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
   11. Control/Configuration requirements
       1. Shall provide one (1) female mini USB port B on top panel for setup and configuration
       2. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for setup and configuration
       3. Shall allow setup and configuration through a system-wide management software from an XTP CrossPoint matrix switcher communication channel
   12. Power requirements
       1. Shall support remote powering from an XTP twisted pair input board or XTP power injector
       2. Shall include an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
   13. General requirements
       1. Shall provide internal color bars test pattern for setup and calibration
       2. Shall provide visual signal on LED indicators located on top panel for video signal presence, video format, HDCP compliance, audio clipping, automatic switching status, and power
       3. Shall provide visual signal on LED indicators on side panel for link status and signal presence
       4. Shall be mountable in European floor boxes from OBO Bettermann - GB2 and GB3 slots, MK by Honeywell, Electraplan, and PUK
       5. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
       6. Shall meet regulatory compliance
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS, WEEE
       7. Shall provide at least three (3) years parts and labor warranty
       8. Shall be compatible with other devices within an XTP System for distribution and routing
   14. Approved device shall be the Extron XTP T FB 202 4K (60-1582-12); no alternates or equals