Accueil - Produits
DTP Systems
Grilles de commutation
Émetteurs Émetteurs DTP3 Émetteurs DTP2 HDMI - Émetteurs de la gamme 230 HDMI - Émetteurs de la gamme 330 DVI - Émetteurs de la gamme 230 DVI - Émetteurs de la gamme 330 DisplayPort - Émetteurs de la gamme 230 DisplayPort - Émetteurs de la gamme 330 Émetteurs multi-formats Récepteurs Récepteurs DTP3 Récepteurs DTP2 HDMI - Récepteurs de la gamme 230 HDMI - Récepteurs de la gamme 330 DVI - Récepteurs de la gamme 330 DisplayPort - Récepteurs de la gamme 230 DisplayPort - Récepteurs de la gamme 330 Distributeurs amplificateurs Sélecteurs Sélecteurs équipés DTP Émetteurs/sélecteurs DTP Scalers et processeurs de signaux Câbles et accessoires DTP Câbles paires torsadées numériques Connecteurs RJ-45 blindés Outils de raccordement pour sertissage Solutions architecturales
Gamme DTP3 CrossPoint 42
DTP CrossPoint 108 4K DTP CrossPoint 82 4K DTP CrossPoint 84 4K DTP CrossPoint 86 4K DTP3 CrossPoint 622 DTP3 CrossPoint 642 DTP3 CrossPoint 662 DTP3 CrossPoint 884 Gamme DTP3 CrossPoint 42

Twitter Copier le lien

Imprimer

Pro

Gamme DTP3 CrossPoint 42

Grilles de commutation 4K/60 4x2 avec scaler et transitions fluides

Caractéristiques principales

Intègre des sources USB‑C^® et HDMI dans des systèmes de présentation
Sortie DTP3 qui supporte la transmission de signaux vidéo avec audio embeddé, de données USB, de contrôle, et d'alimentation jusqu'à 100 m (330') sur un câble CAT 6A blindé
Connecte des sources USB‑C supportant le mode alternatif DisplayPort
Fournit une puissance de charge à la source USB‑C
Scaler Vector™ 4K Extron avancé
Support disponible pour les données USB avec une extension longue distance
Toutes les caractéristiques

DTP3 CrossPoint 42 USB - with USB switching and extension

Previous Next

Galerie d'images

Descriptions pour appel d'offres

Calculateur de débits de données 8K

Études de cas

Remarque : la DTP3 CrossPoint 42 USB n'est pas compatible avec le DTP3 R 301 pour l'extension de données USB.

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

La DTP3 CrossPoint 42 USB Extron est une grille de commutation 4x2 compacte qui supporte des données USB 10Gbps sur le port hôte USB‑C^® local et le hub à quatre ports, ainsi qu'une commutation hôte et une extension de données USB 2. Elle intègre le scaler Vector™ 4K exclusif Extron avec sa capacité de résolution 4K/60 4:4:4 et comprend des entrées USB‑C et HDMI, des sorties HDMI, et une sortie DTP3 pour l'extension de signaux vidéo, audio embeddés, de données USB, d'alimentation, et de contrôle jusqu'à 100 m (330') sur un câble CAT 6A blindé. La DTP3 CrossPoint 42 est disponible pour les applications ne nécessitant pas de données USB. Les deux modèles fournissent des capacités avancées comme un chargeur USB‑C, un désembeddage audio, des effets de transition fluides, et une insertion de logos. Avec toutes ces fonctionnalités, et bien plus encore, la DTP3 CrossPoint 42 USB et la DTP3 CrossPoint 42 fournissent une commutation audiovisuelle rapide et fiable dans les environnements professionnels.

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

Gamme DTP3 CrossPoint 42

TLP Pro 1525TG

Gamme DTP3 CrossPoint 42

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

DTP3 CrossPoint 42 USB

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, USB host switching, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, USB data, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. USB data and switching requirements
  1. USB host connections
    1. One (1) USB-C, shared with video input 1
    2. Two (2) USB type B
    3. Shall support data transfer rates up to USB 10Gbps
  2. Connections at four-port USB device hub
    1. Two (2) USB type A
      1. Shall support transfer rates up to 10 Gbps
    2. Two (2) USB type A
      1. Shall support transfer rates up to 480 Mbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
  4. USB host switching requirements
    1. USB host switching shall be independent of video switching
    2. Local 10 Gbps device ports shall always follow the selected host
    3. Local 480 Gbps devices ports shall follow the selected host or be assignable to either USB type B host port regardless of selected host
6. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
7. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
8. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
9. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
10. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
11. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connections
  3. Shall provide remote power to first-generation DTP receivers over the shielded CAT 6A connections
12. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 USB(part number 60-1925-02); no alternates or equals

DTP3 CrossPoint 42 USB

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, USB host switching, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, USB data, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. USB data and switching requirements
  1. USB host connections
    1. One (1) USB-C, shared with video input 1
    2. Two (2) USB type B
    3. Shall support data transfer rates up to USB 10Gbps
  2. Connections at four-port USB device hub
    1. Two (2) USB type A
      1. Shall support transfer rates up to 10 Gbps
    2. Two (2) USB type A
      1. Shall support transfer rates up to 480 Mbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
  4. USB host switching requirements
    1. USB host switching shall be independent of video switching
    2. Local 10 Gbps device ports shall always follow the selected host
    3. Local 480 Gbps devices ports shall follow the selected host or be assignable to either USB type B host port regardless of selected host
6. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
7. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
8. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
9. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
10. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
11. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connections
  3. Shall provide remote power to first-generation DTP receivers over the shielded CAT 6A connections
12. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 USB(part number 60-1925-02); no alternates or equals

DTP3 T CrossPoint 42

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
6. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
7. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
8. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
9. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
10. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connection
  3. Shall provide remote power to first-generation receivers over the shielded CAT 6A connection
11. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 (part number 60-1925-01); no alternates or equals

DTP3 T CrossPoint 42

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
6. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
7. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
8. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
9. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
10. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connection
  3. Shall provide remote power to first-generation receivers over the shielded CAT 6A connection
11. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 (part number 60-1925-01); no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

Gamme DTP3 CrossPoint 42 -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Partager cet élément par e-mail

Gamme DTP3 CrossPoint 42

Grilles de commutation 4K/60 4x2 avec scaler et transitions fluides

Envoyé à: *

Veuillez entrer une adresse électronique valide.

Message:

( caractère(s) restant(s))

Envoyez-moi une copie

Merci. Votre e-mail a été envoyé.

Une erreur est survenue lors de l'envoi de votre e-mail. Veuillez réessayer ultérieurement.