Accueil - Produits
Fibre optique
Câbles fibre optique
Extendeurs fibre optique Émetteurs/sélecteurs universels Extendeurs DisplayPort Extendeurs HDMI Extendeurs DVI Extendeurs USB Accessoires Sélecteurs fibre optique Grilles de commutation fibre optique Bobines de câble fibre optique Connecteurs et accessoires fibre optique
2LC SM P
2LC OM4 MM P 2LC SM P

Twitter Copier le lien

Imprimer

Pro

2LC SM P

Câbles fibre optique monomodes non sensibles aux courbures LC/LC - Plenum

Caractéristiques principales

Fibre monomode non sensible aux courbures
Gaine OFNP plenum
Construction résistante duplex zip-cord
Doté de connecteurs LC normalisés
Disponible en plusieurs longueurs, allant d'1 mètre (3,3 pieds) à 30 mètres (98,4 pieds)
Toutes les caractéristiques

Galerie d'images

Aperçu interactif

Descriptions pour appel d'offres

Vue d'ensemble
Vidéo
Description
Caractéristiques techniques
Schéma
Schéma des panneaux
Téléchargements

Vue d'ensemble

Les câbles fibre optique monomodes non sensibles aux courbures, 2LC SM P, existent en plusieurs tailles de 1 mètre à 60 mètres. La fibre non sensible aux courbures dispose d'un rayon de courbure faible pour minimiser les pertes liées aux courbures et simplifier l'installation. La faible perte de la fibre monomode permet une transmission exceptionnelle des signaux audiovisuels sur de très longues distances jusqu'à 30 km (18,75 miles).

Vidéo

Description

Caractéristiques techniques

Schéma

Schéma des panneaux

Téléchargements

Produits affichés récemment

2LC SM P

Description pour appel d'offres

Choisissez une référence :

Select a Part Number:

Copier le texte Copié Une erreur est survenue. Veuillez réessayer plus tard.

2LC SM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/1 (part number 26-670-01), no alternates or equals

2LC SM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/1 (part number 26-670-01), no alternates or equals

2LC SM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/3 (part number 26-670-03), no alternates or equals

2LC SM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/3 (part number 26-670-03), no alternates or equals

Ajouter cet élément au panier

Order Message Number

Référence

Remarque : Les produits Extron utilisant la prise d’alimentation universelle acceptent un nombre de types de prises différents. Avant l’utilisation, assurez-vous que l’appareil réponde aux toutes les exigences réglementaires pour votre région et qu’il soit compatible avec les codes et les standards locaux électriques et de sécurité applicables.

Qté

Total actuel :

Voir mon panier

2LC SM P -

Détails du produit

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Partager cet élément par e-mail

2LC SM P

Câbles fibre optique monomodes non sensibles aux courbures LC/LC - Plenum

Envoyé à: *

Veuillez entrer une adresse électronique valide.

Message:

( caractère(s) restant(s))

Envoyez-moi une copie

Merci. Votre e-mail a été envoyé.

Une erreur est survenue lors de l'envoi de votre e-mail. Veuillez réessayer ultérieurement.